Customized Active Lime Production Line High Efficiency Long Service Life
|
|
Good Quality Active Lime Plant Machinery From China Manufacturer Overview of Quick Lime Production We will select the most workable and efficient and economical
solution based o the clients' specific requirement and conditions. Production Process 1. Energy Saving Rotary Lime Kiln Process Rotary kiln is one kind of furnace which is widely used for
calcined active lime production in the world. It is also widely
used in many industries such as construction materials, metallurgy,
chemical and environmental protection. The energy-saving rotary
lime kiln has the advanced structure and stable operation. It
adopts the vertical preheater with low pressure loss which can
effectively improve the preheating effects. The raw materials’
decomposition rate in the vertical preheater can reach to 30%
before entering into the rotary kiln. It is also suitable for
different fuels including pulverized solid fuel, liquid fuel and
gas fuel. The final lime products have high activity. This kind of
rotary kiln already have been widely used in the steel industry and
chemical industry. 2. Traditional Rotary Lime Kiln Process The long rotary lime kiln has the characteristics of simple
structure and stable operation. It increases the length of the
rotary kiln cylinder to improve the preheating effect, and after
preheating, the limestone is entering into the calcination zone for
decomposition; The limestone feeding size can be 10 ~20 mm, 20~40
mm. It can use various fuels including pulverized solid fuel,
liquid fuel and gas fuel. The final lime or dolime product has
relatively higher activity. This kind of rotary kiln is suitable
for middle & small production lines, and is suitable for the
lime production with limestone with small sizes or lower heat
strength. 3. Mixed Burning Vertical Lime Kiln Process The qualified raw materials and solid fuels are mixed uniformly
according to a certain proportion and then sent to the vertical
kiln through a single bucket elevator for calcination. After
calcination, the final lime products are discharged from the bottom
of the vertical kiln through a discharge device to the conveyor,
and the conveyor sends the final lime products to the storage silo.
The hot flue gas generated by calcination will firstly go into the
dust collecting system, and then the clean flue gas will be emitted
through chimney to the atmosphere.
Production Process
Sudan 100TPD Lime Plant Project Description: This Buyer is located in North Sudan. The final product of this plant is used for steel plant. Shaft kiln is taken for it and the production capacity is 100TPD. Screen Plate details according to the buyer's requirement: Fuel:LPG and Diesel Raw Material Size:300mm Production Capacity:100TPD Heat Value of LPG:11.500 kcal/kg.
Service provided to client during this process: 1.Initial Design was provided according to the client’s requirement and then the contract was signed after the initial design is approved by the buyer. 2.After the down payment was available to our account, the final design was made and provided which was also agreed by the buyer. 3.All the equipment were put into production and good-quality product are ensured. Through continuous communication, the trust from client was enjoyed by us. And our factory was also thought highly by client which contributed a lot to the contract signing. |
| Product Tags: quick lime plant hydrated lime production line |
|
150m Kiln Active Lime production line Sugar Beet Residue Mud Treatment To Produce |
|
Quick Active Lime Production Line Calcination Process Sugar Beet Residue Disposal To Produce |
|
High Efficiency Active Lime Production Line Long Service Life 50-1000TPD |
|
Caco3 Horizontal 300 Ton Per Day Calcination Rotary Kiln |
|
Energy Saving Quicklime 600tpd Active Lime Production Line |
|
Vertical Preheater 50t/D Hydrated Lime Production Line |