Seamless Nomex Heat Transfer Printing Felt Belt For Roller Printing Machine

Seamless Nomex Heat Transfer Printing Felt Belt For Roller Printing Machine

FELT BELTS FOR HEAT TRANSFER PRINTING

Our seamless Nomex felt belt is mainly used for roller transfer machines. The blankets are made of imported high-temperature aramid fiber. The intermediate endless base cloths are polyester dry fabrics and Kevlar fabrics. The working temperature is up to 250℃. After using, the width shrinkage rate is 2%, the elongation rate is 3%, the gram weight is 3100 g/m3, the thickness is 6-10mm, the surface is smooth, the carpet body is soft, it is not easy to crack, and longer service life. It is a special thermal transfer felt belt for the production of certain fabrics, decorative fabrics, and other fabrics.

Our products are widely used in every field of modern society, such as electric blanket, bedding, car interior, bags, mask, hats, clothes, shoe cover, apron, cloth, packaging material, furniture, mattresses, toys, clothing, filter fabric, filling materials, agriculture, home textile, garment, industry, interlining and other industries

Product details photos:

Product specification:

Product Advantage:

1. Selection Of Brand Raw Material, Common Specifications Have Temperature 16-180℃ And 220-250℃.

2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside, The Felt Will Automatically Shrink After Heating, Wrapped Tightly.

3. The Belt Surface Formation, Uniform Density, Good Resistance, Long Work Life.

Product Application:

Our seamless Nomex felt belt is mainly used for roller transfer machines. All the size could be customized, welcome contact us to get the details. Some application is shown for your information:

The direction of our felt belt:

1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter

to see if the perimeter is the same.

2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to

170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃,

idle for 2 hours.

3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg

according to your needed and start printing.