Ear - Hook Style Dust Face Mask , FFP Dust Mask For Chemical /
Industry
1 . Descriptions
FFP1 Dust Mask with adjustable aluminum nose clip makes wearing
more sealless leakage .
With latex-free elastic strap , soft nose liner , softer and fit
the face .
Easy-breathing valve makes breathing more smooth .
2 . Material of each layer
Outer layer : Protective needle punched cotton
Middle layde : FFP1 melt blown filter(have filter efficiency level
of 80%)
Inner layer : Shaped needle punched cotton
3 . Mask CE Quality Standards
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish | Filter Efficiency | Penetration | Resistant |
FFP1 NR | ≧80% | < 20% | < 21mmH2O |
FFP2 NR | ≧94% | < 5% | < 24mmH2O |
FFP3 NR | ≧99% | < 1% | < 30mmH2O |
1 . Stardard
: EN : 149 : 2001 + A1 : 2009
2 . Test Machine :
TSI 8130
3 . Test Flow :
95Liters/Min
4 . Test
Medium : NACL & DOP
4 . Certification
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in
Annex VII under surveillance of BSI , notified body n°0086.
5 . Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its
required for use.
- Use the respirator in accordance with applicable health and safety
regulations.
- Fit the respirator and check leak-tightness before entering the
contaminated area.
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
advice.
6 . Packing
Normal Packing 20pcs/box,400pcs/ctn
7 . Points for Attention
1. This product is prohibited to be used with damaged package;
2. Do not use in atmospheres containing less than 19.5% oxygen, as
this respirator does not supply oxygen; Not for use in oil mist
atmospheres;
3. If the product becomes damaged, soiled, or breathing becomes
difficult, leave the contaminated area immediately and replace the
product;
4. This product is one-time use only and can not be washed;
5. This product should be stored in a clean, dry and ventilated
environment with relative humidity less than 80% and without
harmful gas.
8 . More pictures