Mounting Of Plug And Pin Clamping Unit For Temperature Rise Tester
Australian and New Zealand gauge list:
| Figure 2.1 | dimensions of plugs |
| Figure 2.2 | apparatus for flexing test |
| Figure 2.3 | form of pin |
| Figure 2.4 | dimensions of insulation on insulated live pins |
| Figure 2.5 | pressure test apparatus for insulation on insulated plug pins at
high temperature |
| Figure 2.6 | impact test apparatus for insulation on insulated plug pins at low
temperature |
| Figure 2.7 | abrasion test apparatus for insulation on insulated pin plugs |
| Figure 2.8 | application of force for pin bending test |
| Figure 2.9 | mounting of plug for temperature rise test |
| Figure 2.10 | pin clamping unit for the temperature rise test |
Application
The design and construction of a plug provided with earthing
connections shall be such that
when the plug is correctly wired and completely assembled-
(a) loose terminal screw or conductive material cannot bridge any
live parts or earthing
parts;
(b) the earthing parts are effectively isnlated m contact with a
live conductor that may
become detached: and
(c) the live parts are effectively isolated from contact with any
earthing conductor that
may become detached.
Any connections for auxiliary devices such as radio interference
suppressors or visual
indicators, shall comply with the above requirements.
2.10 ARRANGEMENT OF EARTHING CONNECTIONS
The earthing pin of any low voltage three-pin plug shall be that
pin which is radial to the
circle embracing the pins (see Figure 2. 1(a), Figure 2.(f) and
Figure 2.(g).
ConformsTo
AS/NZS 3112 Figure 2.9 and Figure 2.10
Ordering Information
Test apparatus for pin temperature test AS/NZS 3112
