Portable Electric Pressure Test Pump For Pipeline Construction

Portable Stable Electric Pressure Test Pump With Water Tank For Pipeline Construction

Description

This DSY portable electric pressure test pump series has the advantages of compact production structure, stable output pressure, low energy consumption, convenient carrying and easy maintenance. It is reliable equipment for pipeline construction, pressure vessel test and pipeline pressure monitoring.
It's widely used in construction, decoration site, fire site, property management of garden materials, pressure vessels and other production places.

Specification

You see our price is base on above red one, for other size, if you want know price, pls feel free to contact us, tks.

Plastic / steel tank according to customers' demand
Aluminum / brass pump also have short type, medium-sized, long type pumps for choices.

Advantages:

1. For quick and exact compression testing
2. For testing of leaks in installations, especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe applications

Packing:
We put pp fittings into plastic box, then put in carton.

Shipping:
For sample orders, we can ship it by international express, such as DHL, FEDEX, TNT and China EMS.
For bulk orders, we support air cargo and sea shipping, our factory are near from Shanghai port and Ningbo port, and we can transfer goods to port within 24 hours.

Precautions when using electric pressure test pump
1. Before use, firstly tighten the switch clockwise.
2. The working medium used must be filtered by a 100 mesh/inch filter before being injected into the water tank, and the suction port cannot leak out of the water surface.
3. It should not be used in the workplace with acid, alkali and corrosive substances.
4. After stopping use, use kerosene or kerosene as a medium to filter it

Instruction for use of Electric Pressure Test Pump

1. Check that the gasket and the joint are well matched, and connect the water inlet pipe correctly;
2. The fire wire and ground wire must be correctly connected before use, and must not be wrongly connected! The power cord should be connected to a socket with leakage protection.
3. Loosen the pressure regulating knob first, do not start the motor with load, so as not to damage the motor
4. Check the filter regularly to avoid clogging
5. If the water pump cannot absorb water, please add a certain amount of water from the water inlet pipe to the water pump.
6. Prevent air from entering the water pump.
7. After the pressure test is over, loosen the pressure adjustment knob, add a little 20# oil, and keep it loose. At the same time, turn on the power and add oil at the water inlet to run for half a minute.
8. It is strictly forbidden to start the machine without water, otherwise the sealing ring and piston ring will be easily damaged.
9. The water source should not have impurities, otherwise the seal will be easily stuck, which will cause the phenomenon of no water absorption.
10. Water leakage at the lower part of the pump body means that the sealing ring is damaged, and the sealing ring must be replaced.
11. Please use the pressure regulating button correctly, do not turn the pressure regulating knob to the end, otherwise the high pressure will cause high pressure damage to the meter, etc.

Be sure to loosen the red pressure regulating valve before turning it on! so as not to explode the pressure gauge

The new technical solution of the electric pressure test pump has the following advantages:
1. The electric pressure test pump provided by the new electric pressure test pump has the advantages of small size and easy operation, and the liquid is pressurized into the external pipeline through the power pump to achieve the For the purpose of pressurizing the external pipeline, compared with the traditional manual pressure test pump, the new electric pressure test pump not only saves manpower but also improves the efficiency. By using a diaphragm pump, it can provide sufficient power under the premise of ensuring a small volume.
2. When it is necessary to pressurize the pipeline to be measured, first make sure that the valve is closed so that the water inlet pipeline and the water outlet pipeline are in a disconnected state, then connect the water inlet pipeline to the liquid source, and connect the water outlet pipeline to the pipeline to be measured. Connected, the user can control the power pump to work through the control switch, and the user can grasp the pressure value of the water outlet pipeline in real time through the pressure display at the mechanical pressure gauge. When the water outlet pipeline reaches the expected pressure, it means the pipeline to be tested at this time. When the expected pressure is reached, the power pump is stopped by controlling the control switch, and the pressurization of the pipeline to be tested is completed at this time. After the test is completed, the control valve is opened, so that the water inlet pipeline and the water outlet pipeline are connected through the connecting pipeline, and the water body with higher pressure at the water outlet pipeline flows to the water inlet pipeline, so as to realize the pressure relief of the water outlet pipeline to the water inlet pipeline.

Our service:

Our Expertise is our Strength. Our team of experts understand the products and its application very well, who can guide our valuable customers to select the right product for the right application.
Light Weight Portable Hand Pressure Test Pump With Reasonable Price
The color could be designed by yourself, the same as your logo.