4-20mA 0 ~ 14pH IP66 Online pH Meter For Process Monitoring
|
4-20mA 0 ~ 14pH IP66 Online pH Meter for Process Monitoring
APX1 - C1 is a measure of water pH and ORP value of real-time online monitoring controller, can access a variety of traditional pH or ORP compound sensor.
Advantages of pH/ORP controllers:
pH ORP Controller Parameters:
pH ORP controller wiring demonstration:
Place the controller with the screen facing down on the foam pad.Use a phillips screwdriver to unscrew the screws of the back cover.Take out the cable glands.Insert the cable glands into the reserved hole,tighten the nut inside the rear cover.Loosen the nut on the outside of the rear cover.Insert the power cable into the gland on one side.Pass the pH sensor wire through the other side.Note: Do not cross the power line and the sensor line to prevent the drift of the measurement data caused by interference.The power cable has two ends.The brown live wire is connected to the terminal hole marked "L".The blue neutral wire is connected to the terminal hole marked "N".
pH ORP Controller Applications:
Water treatment monitoring: drinking water, surface water source
water quality, groundwater, environmental sewage discharge
monitoring, urban drainage network monitoring
If you are interested in more details on pH ORP controller, please contact us.
|
||||||||||||||||||||||||||||||||||||||||||
Product Tags: Enhanced ABS Shell pH Meter IP66 Online pH Meter IP66 Grade pH Controller |
![]() |
Dule Channels Analog PH And ORP Controller With RS485 And Two Relays Water Treatment |
![]() |
Dule Channels Analog PH And ORP Controller With RS485 For Industrial Wastewater Treatment |
![]() |
Analog Type Dule Channels PH And ORP Controller With Historical Data Record For Swimming Pool |
![]() |
High Precision 4~20mA or 0~20mA IP66 pH ORP Meter Controller For Waste Water |
![]() |
-10~+150℃ NTC10K/PT1000 Automatic Or Manual pH ORP Meter Controller For Water |
![]() |
0~14pH 4~20mA or 0~20mA Online pH ORP Meter Controller For Water Treatment |