Analog 0.00~10.00 mS/cm conductivity controller for Pure water
Daruifuno's conductivity controller is matched with an analog
conductivity sensor to calculate the conductivity of the solution
by detecting the intensity of the current in the solution. At the
same time, the instrument provides high-precision temperature
measurement and compensation functions. In addition, the controller
can also provide parameters such as resistivity, TDS, salinity and
other related conductivity.
Specification:
| Model | AEC1-C2A |
| Software Version | DRFN EC Analysis software V1.0 |
| Display Range | EC | 0.00~10.00 mS/cm (Full range automatic switching) |
| Resistivity | 0.01Ω.cm~18MΩ.cm |
| TDS | 0.000mg/L~500g/L |
| Salinity | (0.00~10.0)% |
| Display Range(Temp) | -10～150℃ /14~302℉ |
| Resolution | EC | 0.01µS /cm |
| Resistivity | 0.01Ω.cm |
| TDS | 0.001mg/L |
| Salinity | 0.1℃/ 0.1℉ |
| Accuracy | 0.1% of the measuring range |
| Stability | 0.05% of the measuring range every 24 hours, no accumulation |
| Repeatability | 0.1% better than the measuring range |
| Temperature Compensation | Automatic or manual(NTC10K or PT1000) |
| Relay Output | Two SPST relays, maximum load 3A/250VAC |
| Communication | RS485 Modbus RTU |
| Signal Output | Two 0/4~20mA current outputs maximum load 1000Ω |
| Sensor Diagnosis | Image display |
| Time history/data record | —— |
| Maintenance records | —— |
| Configuration | Power failure protection, indefinite retention of parameters |
| Language | Chinese and English |
| Display | 128*64 3.2-inch large graphic dot matrix LCD |
| Protection Grade | IP66 |
| Enclosure Material | Enhanced ABS |
| Power Supply | AC: 100~240V |
| Dimension | 100*100*120mm |
| Hole Size | 92*92mm |
| Operating Temperature | 0～60℃, RH<95%, non-condensing |
| Storage Temperature | -20～70℃, RH<55%, non-condensing |
| Installation Method | Panel |
| Weight | 500g |
| Power Consumption | 3W |
Please click the user manual of conductivity controller here:
Delfino Conductivity Controller Manual.pdf
Brief introduction:
● 3.2-inch large LCD screen;
● User-friendly Chinese and English language interface;
● Password can be set to prevent misoperation;
● 2 SPST multi-function and settable relays;
● Two 0/4~20mA active current loop outputs;
● RS485 interface, Modbus RTU communication protocol;
● Temperature detection and compensation function;
● Shortcut button of AEC1 helps you perform daily maintenance
quickly;
● IP66 waterproof level, sealed enclosure can isolate pollution and
corrosive gas;
● Two dimensions, can meet a variety of installation methods, and
provide the necessary installation accessories at the same time.
Aplication:
◇ Pure water ultra pure water
◇ drinking water
◇ Waste water
◇ Food and beverage industry
◇ chemical process
◇ Industrial water supply
FAQ
1. Which sensors can be connected to your Conductivity controller?
A: The conductivity meter can be compatible with DRFN analog
conductivity sensors.
2. Does the Conductivity controller have an ambient temperature alarm function?
Our conductivity controller has ambient temperature alarm function
4: How long is your delivery time?
A: Generally it is 3 days if the goods are in stock. or within 20
days if the goods are not in stock, it is according to quantity.
