0 ~ 8bar 50℃ Chlorine Dioxide Analyzer For Drinking Water Disinfection

0 ~ 8bar 50℃ Chlorine Dioxide Analyzer For Drinking Water Disinfection

 
 
Introduction 
 

The ADS2-U3D-CD4.2-AS2/AS3 chlorine dioxide analyzer is a single-parameter instrument. It is compatible with DRFN's chlorine dioxide sensors. The chlorine dioxide analyzer with AS2 sensor can be used under the temperature of 0-50℃, with AS3 sensor can be used under the temperature of 0-70℃. They both can work under the pressure range of 0 ~ 8 bar.
 
 
Advantages Of Chlorine Dioxide Analyzer

1. Menu password can be set to facilitate hierarchical management;

2. A two-wire RS485 interface, the communication protocol is MODBUS RTU. The chlorine dioxide controller supports JSON text data format.

3. All the configuration entered by the user is kept indefinitely, even if there is no power, the data will not be lost.

4. 128*64 black and white graphic dot matrix screen, and the display backlight provides always on and energy-saving mode selection.

5.  It has time and historical data recording functions to meet higher data management requirements.

6. Abundant output meets monitoring, control, and remote data transmission at the same time.

Applications Of Chlorine Dioxide Analyzer

The instrument is used for disinfectant measurement in drinking water, swimming pool and industrial cooling water, water plant effluent and municipal pipe network monitoring.

Parameters Of Chlorine Dioxide Analyzer
 

 

The Matching Chlorine Dioxide Sensor Recommendation
 

• Model: AS2/AS3
• pH range: 1~12
• Pressure range: 0~8 bar
• Temperature range: 0~50℃ (AS2), 0~70℃(AS3)
• Automatic temperature compensation
• Response time: T90 about 30 s
• Flow rate: about 30 l/h
• Shaft length: standard 175 mm, and up to 220 mm in length (mA-Version)
• Connection: for mA-version 2-pole terminal, M12 male
• Material: PVC-U (AS2), PEEK (AS3)