2 SPST Relays Water Quality Transmitter Online Hydrogen Peroxide Analyzer

Online Hydrogen Peroxide Analyzer 2 SPST Relays Especially For High Concentrations

 
Product Introduction
 

In the treatment of drinking water, hydrogen peroxide decomposes slowly, and has a mild effect on organic matter, which can ensure a long-term residual disinfection effect. Therefore, hydrogen peroxide is an ideal disinfectant.

The hydrogen peroxide analyzer ADS2-U3-WP10 is an instrument specially designed for the measurement of hydrogen peroxide, especially for high concentrations. DRFN’s hydrogen peroxide controller can be connected to all DRFN’s hydrogen peroxide sensors. We provide AC or DC power supply mode, both of which are wide-voltage power supply.

Product Advantages

1. The protection level of the hydrogen peroxide controller is IP66, which can effectively isolate the pollution and corrosive gas intrusion from the external environment.

2. The hydrogen peroxide meter is equipped with a two-wire RS485 interface, the communication protocol is MODBUS RTU.

3. The screen uses a 128*64 black and white graphic dot matrix screen, and the display backlight provides constant light and energy-saving mode selection.

4. The hydrogen peroxide controller can record the user's maintenance details of the equipment, the calibration effect of the diagnostic sensor, and will give corresponding prompts for inaccurate calibration instruments.

5. The meter supports a variety of installation methods and can be applied to more different installation environments.

6. The hydrogen peroxide meter has clock and historical data recording functions to meet higher data management requirements.

7. The standard configuration is 2 settable SPST relays. The setting objects include: alarms for the high and low values of the measurement parameters, the control of the cleaning cycle of the sensor. The warning of the working environment temperature of the instrument itself in harsh environment, as an auxiliary means of hazard protection, the maximum load of the relay is 3A/250VAC.
 
 
Applications Of The Hydrogen Peroxide Analyzer
 
Drinking water, industrial wastewater, water supply system, urban sewage treatment

Parameters Of The Hydrogen Peroxide Analyzer

 

 
Matching Hydrogen Peroxide Sensor Parameters

• PH range: 2~11
• Pressure range: 0~1 bar, no pressure surges and/or fluctuations
• Temperature range: 5~45 ℃ 
• Response time: T₉₀ about 8 min
• Flow rate: about 30 l/h, low flow-dependence
• Sensor with automatic temperature compensation
• Material: PVC-U, stainless steel 1.4571
• Calibration: at the controller, analytical determination by DPD-method