Disinfectant Peracetic Acid Analyzer Amperometric Sensor For Water Measuring PAA

Disinfectant Peracetic Acid Analyzer Amperometric Sensor For Measuring PAA In Water

Product Introduction

PAA is a highly effective bactericide that does not form any harmful disinfection by products (DBP) like many chlorine products do. It is widely used as a disinfectant in various applications. The ADS2-U3-P10 peracetic acid analyzer is a single parameter instrument, which is designed to monitor PAA in drinking water, industrial cooling and rinse water, wastewater or other freshwater samples containing peracetic acid.

Features Of The Peracetic Acid Transmitter

>> The peracetic acid controller is equipped with 2 settable 0/4~20mA active current loop outputs;

>> The standard configuration of the PAA transmitter is 2 settable SPST alarm relays;

>> Time and historical data recording functions to meet the user’s higher data management requirements;

>> Provide 100~240V AC or 18~36V DC power supply mode, both of which are wide-voltage power supply;

>> The communication standard is equipped with a two-wire RS485 interface, the communication protocol is MODBUS RTU;

>> The display uses a 128*64 black and white graphic dot matrix screen, the display backlight can be adjusted;

>> The enclosure protection level is IP66 and supports a variety of installation methods.

Parameters Of Peracetic Acid Analyzer

 
Matching Peracetic Acid Sensor Parameters

• PH range: 1~6
• Pressure range: 0~1 bar, no pressure surges and/or fluctuations
• Temperature range: 0~45 ℃ 
• Response time: T₉₀ about 1.5~5 min, depending on type and temperature
• Flow rate: about 45 l/h, low flow-dependence
• Sensor with automatic temperature compensation
• Material: PVC-U, stainless steel 1.4571
• Calibration: at the controller, analytical determination by DPD-method
• Application: Freshwater, all types of water treatment (surfactants and lead acids are tolerated).