800g 24V Chlorine Analyzers Drinking Water Disinfection Measurement

24V Chlorine Meter For Drinking Water Disinfection Measurement 800g

 
 
Brief Introduction
 
A complete set of the chlorine meter usually includes an ADS controller, a set of circulation systems for installing sensors, and special sensors corresponding to the measurement object. These main components can be installed on a customized backplane of the kit, or in an integrated instrument box, the user only needs to connect the inlet water sample pipe and the drain water pipe to complete the instrument installation.

 
 
Advantages Of The Chlorine Meter

 
1. Compatible with all DRFN membrane-covered ampere current sensors for disinfection residual chlorine.
 
2. Abundant output meets monitoring, control, and remote data transmission at the same time.
 
3. The communication standard is equipped with a two-wire RS485 interface, the communication protocol is MODBUS RTU. The instrument supports JSON text data format.
 
4. The display uses a 128*64 black and white graphic dot matrix screen, and the display backlight provides constant light and energy-saving mode selection.
 
5. The standard configuration of the universal chlorine meter is equipped with 2 settable 0/4~20mA active current loop outputs, and each current output allows the user to specify what measurement value it represents. At the same time, each output can define the range of output value corresponding to the maximum and minimum current value by itself, whether it is forward or reverse correspondence, it is all right. For long-distance output, current calibration can be used to ensure the accuracy of the output. The data accuracy of the current is 0.00025 (16 bits), and the maximum load is 1000Ω.

Applications Of The Chlorine Meter

 
Water treatment monitoring: domestic water, swimming pool, environmental protection sewage discharge monitoring;
 
Industrial process monitoring: circulating water, cooling water, aquaculture, papermaking, food, medicine manufacturing, etc.
 
 

Technical Parameters
 

 

 
The Matching Chlorine Sensors Recommendation
 

• Model: CL4.2

• pH range: 6~8

• Pressure range: 0~1 bar, no pressure surges or fluctuations

• Temperature range: 0~ 45℃

• Integrated automatic temperature compensation
• Response time: T₉₀ about 30 seconds
• Flow rate: about 30 l/h, low flow-dependence
• Shaft length: standard 175 mm, and up to 220 mm in length (mA-Version)

• Connection: for mA-version 2-pole terminal, M12 male

• Material: PVC-U and semipermeable membrane