| Model power | ZGD330 10-200KVA |
| 10KVA | 15KVA | 20KVA | 30KVA | 40KVA | 60KVA | 80KVA | 100KVA | 120KVA | 160KVA | 200KVA |
| Capacity | 8KW | 12 KW | 16 KW | 24 KW | 32 KW | 48 KW | 64 KW | 80 KW | 96KW | 128 KW | 160 KW |
| Input |
| Rated voltage | 380/400/415 Vac three-phase |
| Voltage range | ±20% |
| Frequency range | 45-65Hz |
| Power factor | >0.92with harmonic filter |
| Current harmonic distortion | <5%with harmonic filter |
| Soft Start | 0-100% in10" |
| Bypass Input |
| Rated voltage | 380/400/415 Vac three-phase |
| Permitted voltage range | ±15%(selectable from ±10% to ±25% from front panel) |
| Rated frequency | 50/60Hz |
| Permitted frequency range | ±2%(selectable from ±1% to ±5% from front panel) |
| Standard features | Back Feed protection; split bypass line |
| Batteries |
| Type | Maintenance-free lead-acid VRLA AGM / GEL;NICd |
| Battery voltage | 384VDC | 480VDC |
| Maximum recharge current(A) | 0.2×C10 |
| AC ripple voltage | <1% |
| Inverter Output |
| Number of phases | 3+N |
| Rated voltage(V) | 380Vac |
| Regulation of the output voltage | 380~424Vac phase/neutral(from control panel) |
| Crest factor (Ipeak / Irms) | 3:1 |
| Static stability | ±1% |
| Dynamic stability | ±5% |
| Frequency | 50/60Hz configurable |
| Overload | 110% 125% 150% of the rated current for 5h/10'/1' |
| Frequency stability | ±0.05% on mains failure;±2%(selectable from ±1% to ±5%)with mains
supply present |
| Remote signaling | Volt free contacts |
| Remote controls | EPO and Bypass |
| Communication | RS232 + romote contacts |
| Operation temperature | 0ºC/ + 40ºC |
| Relative humidity | <95% non condensing |
| Noise | 54dBA at 1m | 50-65dBA at 1m |
| Protection degree | IP20 |
| Efficiency smart mode | up to 98% |
| Compliance | Safety:EN 62040-1-1(Directive 2006/95/EC); EMC:6200-2(Directive
2004/108/EC) |
