210KVA Modular UPS Low Frequency UPS Online 3 Phases
Uninterruptible Power Supply Ups 380V
High intelligence and reliable power supply:ZGD330 provides maximum protection for vital mission-critical
networks, security applications (electro- medical)and industrial
applications thanks to its outstanding mechanical and electrical
design.
The load is powered continuously by the inverter with a filtered,
stabilized and regulated sine wave supply. The input and output EMI
filters considerably increase the immunity of the load to mains
disturbances and surges.
The ZGD330 uses on-line double conversion technology (VFI) with
isolation transformer on the inverter output.
The ZGD330 is supplied with Watch & Save 3000 software as
standard and can be remotely monitored using the Power Net Guard
system from anywhere in the world. Additional battery extension
packs allow the standard battery routine to be extended up to
several hours.
Application:
Servers,
Local area Network(LAN),
Data centers,
Telecommunications,
Electro-medical equipment
Minimum impact on supplies easy sources:
Input current distortion <4% for the ZGD330 with filter with
sinusoidal absorption to remove the risk of resonance with other
input supply users or phase shift capacitor sets. The absorbed
current distortion is independent of input supply parameters such
as impedance. This enable ZGD330 to deliver maximum performance
levels regardless of the installation environment. With these input
features ZGD330 can achieve significant savings in terms of sizing
and power supply sources isolation transformers and generators over
less sophisticated power systems.
Maximum battery care:
Battery deep discharge protection;
Temperature compensating charger;
Built-in automatic and manual battery test feature.
Simple to install:
Capability to install the UPS into any distribution system(neutral
not required on rectifier input);
Capability to separate the rectifier/bypass power networks and to
power these from two separate sources, without Galvanic isolation
(Necessary on UPS without an output transformer).
High reliability:
Extremely high short-circuit current to ensure compatibility with
the most difficult transformer applications (lighting, drives and
industrial processes) and an isolation transformer on the inverter
output;
Full microprocessor control with no-break static and manual
bypasses;
IGBT technology.
Other characteristics
0.8 power factor make ZGD330 suitable for powering ICT and
Industrial loads;
High level diagnostics: event log with 128 messages, states,
measurements and alarms - available from the built-in LCD with
several languages;
