Stainless Steel 2800mm Heavy Duty Conveyor Rollers Trough Roller
|
|
Stainless Steel 2800mm Heavy Duty Conveyor Rollers Trough Roller Customized Heavy Duty Conveyor Mining Idler Trough Grooved Roller
The structure of the belt conveyor automatic correction device is quite different from the traditional correction device. It mainly consists of a deviation adjustment roller, an inclined friction roller, a bracket, and a deviation adjustment frame. The bracket is stuck on the channel steel of the belt frame, and the installation size of the inclined roller is the same as that of the standard roller bracket of the belt conveyor. The deflecting roller is installed on the bracket, and the friction roller (ordinary roller) is installed on the inclined bracket. When the belt conveyor runs out of direction, such as the belt conveyor runs to the left, the lateral force of the left idler roller on the belt is greater than that of the right. The reaction force of the roller pulls the belt to the right, and at the same time adjusts the deviation frame, the left side rotates an angle forward, so that the left side of the whole device is behind the front and the right side. According to the rule of "after running, not forward", the belt moves to the right. So as to achieve the purpose of automatic deviation adjustment.
Conveyor Roller Tubes 1. Sizes range from 1″ diameter up to 12″ diameter and anything in between 2. Tube Thickness from 18 ga. up to 1″ thick 3. Materials include: Mild Steel,Galvanized Steel,Stainless Steel, Aluminum,PVC,Industrial Pipe 4. Plating options for Zinc,Chrome,or Nickel 5. Heat Treating option for a surface hardness up to Rockwell C 62 6. Assembly Options Include: Press Fit,Crimped,Welded End Plates,Fully Welded Tube & Axles
Conveyor Roller Axles
1. Sizes range from 1/4″ to 3 7/16″ 2. Shapes include Hex, Round, or Square 3. Materials include Mild Steel and Stainless Steel 4. Center Puck option to prevent axle deflection and increase load capacity 5. Axle Retentions include: Spring,Cotter Pin,Hog Rong,Snap RIng, Tapped Ends,Threaded Ends,Milled Ends,Keeper Bar Slot
Flate/Carrier/Carrying Rollers: Used to handle bulk&unit material. Impact Rollers: Installed at the loading point to absorb the shocks and to help protect against belt damage. Return Rollers:used to sustain and support the belt during its return section and performs a cleaning action. Return rollers with spaced rings(comb rollers/rubber disc roller) Return roller with helical rubber rings(spiral rollers) Self-aligning/Training Rollers: Used to adjust the belt deviation preventing hunting and ensuring
stable operation of conveyor belt. |
||||||||||||||||||||||||||||||||||||||||
| Product Tags: 2800mm Heavy Duty Conveyor Rollers Q345 Heavy Duty Conveyor Rollers 2800mm Trough Roller | ||||||||||||||||||||||||||||||||||||||||
|
194mm Dia Heavy Duty Conveyor Rollers |
|
Carbon Steel 5KW Heavy Duty Conveyor Rollers |
|
Self Aligning Heavy Duty Conveyor Rollers |
|
Mines Anti Combustion Heavy Duty Conveyor Rollers High Hardness |
|
Carbon Steel Conveyor Impact Roller For Heavy Duty Mining Project |
|
Steel 200mm Length Idler Roller For Belt Conveyor System |