Description Well Inline Water Pump Pressure Control Switch Controller 12bar
It is an intelligent digital pressure switch setting pressure
measurement, pressure display, control in one professional unit. It
has followed features: easy operation, good shock resistance, high
precision, long-term stability.
It can realize the control function: low pressure to stop, the high
pressure to start or the high pressure to stop, the low pressure to
start. The control pressure can be set up in the whole range. It
also has the followed functions: delay control, reverse control,
three pressure units to change, one key to error clearing, leakage
pressure protection, password protection, pressure detection
automatically.
It is widely used in building water supply, hydraulic pressure
control, supporting equipment of automated machine.
Detailed Images Well Inline Water Pump Pressure Control Switch Controller 12bar
Specification Well Inline Water Pump Pressure Control Switch Controller 12bar
| Pressure Range | 0-0.2...0.6...1...1.6...2.5...5...10...25...40...60Mpa |
| Overload Pressure | 150% |
| Acc. | 0.5%FS |
| Supply | 24VDC, 220VAC, 380VAC (Selectable) |
| Alarm Point Set | Any point can be set within the range. |
| Output Signal | Relay signal |
| Load Capacity | 380V 3A 220V 5A 24V 5A |
| Sampling Frequency | 5 Times/sec |
| Operation Temperature | -20℃~80℃ |
| Measurement Medium | Liquid, gas compatible with 316L stainless steel. |
| Connection Protection | Reverse protection, short-circuit protection |
| Connector | M20*1.5, G1/2, G1/4 (selectable) |
| Outlet Line | Power: red blue Output: black white |
Features Well Inline Water Pump Pressure Control Switch Controller 12bar
Forward and reverse action switch
One-key reset without pressure
Small range shield
Error linear correction
Multi-unit switching
Anti-water shortage pump
Control delay
Scanning speed adjustment
Large-capacity relay
Reverse polarity protection
