Differential pressure control water air pressure switch with alarm

Specification Differential pressure control water air pressure switch with alarm

Using a handle with a scale scale, the switching pressure of the differential pressure switch does not need to be displayed, but can also be adjusted with a screwdriver.

 The switch pressure should be specified for vertical installation, we recommend using the pipe connection facing down, if the switch is horizontal installation with AMP connector, the switch value may be 20Pa higher than the actual value.

Application Differential pressure control water air pressure switch with alarm

Widely used in the following occasions
1, Air conditioning and clean room

2,Fan and blower control
3,Intelligent Building • Filter and blower controls
4, Environmental protection • Fluid and level control, etc.

Features Differential pressure control water air pressure switch with alarm

Diaphragm material:
Silicone resin, the temperature is 15CTC, other materials can be customize

pressure connection
2 plastic pipe connection holes P1 and P2, outer diameter 6mm,
P1 is connected to high voltage, marked as +
P2 is connected to low voltage, the mark is one

AMP float insert 6.3mmX0.8mm, D1N standard
With three screw terminals, pressure connection tube
Shell material
The switch is PA6. 6
Shell is PS
weight:
With shell: about 150g Without shell: 110g Mechanical working life More than 1 million switches
Electrical connections
46244, or push-button screw terminals
Cable PG-11 or M2 0XI.5

Dimension Differential pressure control water air pressure switch with alarm

Selection Guide Differential pressure control water air pressure switch with alarm