Y09-010 Laminar Flow Test Cleanroom Fogger In Pharma Factory

Cleanroom Fogger Clean Room Laminar Flow Test In Pharma Factory

Cleanroom fogger can meet a wide range of applications, such as purification workshops of class 100 and above. This small, easy-to-use tool can show the airflow and turbulence in the control area using only DI water. The spray output is about 60 degrees Fahrenheit, a single fan blows 4CFM of fog, lasts about 50 minutes, switch controls the spray, 100-10000 level purification workshop uses 16 megohm DI water, 1-10 level purification workshop needs 64 megohm DI water

The specification of cleanromm fogger

1. Voltage: AC 220V

2. Power: 250W

3. Optimum capacity of water within the tank: 3.6 liter

4. Product size: 310 × 209 × 210 mm (length × width × height)

5. Net weight: 8 Kg, weight with water: 12Kg

6. Fogging amount: ≥1700ml / h

7. Atomized particle size: 1-10 micrometers

Applications of cleanroom fogger
1. Clean room laminar flow test (especially suitable for use in pharmaceutical factories)
2. Airflow balance test
3. Optimization of the wet cleaning and discharge system
4. Test of exhaust system of chemical treatment equipment
5. Verification of personal safety discharge system
6. Pressure balance inside and outside the room
7. Leak test of air duct