Stop Screw BT618 Plastic Injection Mold Parts No tapping

Cooling circuit plugs with NPT,plastic mould part feature:

How to use it:

1,When installing into molds,please make sure the space is at least 0.1mm wider than cooling circuit plugs.

2,If there is no specific setting for the coling circuit plugs:first relesae,then using the air spray to reset.

 Theory:According to sloping method,the O-Ring and springs will enlarge to fit the cooling circuit plugs.

 Using:8mm cooling circuit plugs for over 16kg/cm2

             10mm cooling circuit plugs for over 17kg/cm2

             12mm cooling circuit plugs for over 19kg/cm2

Specialty:

1,No tapping,no rust.

2,Can be adjusted for tightness

3 ,Can be placed at any water path and moved accordingly.

4 ,Can be cooling down or heating up by water or oil.

5 ,Under normal operating temperature:-5~+135°C.

6 ,Special operating temperature:-10~+280°C .

♦ Products show