Good Compatibility Chlorinated Polyolefin Resin For Ultraviolet Curing System

Good Compatibility Chlorinated Polyolefin Resin For Ultraviolet Curing System

Chlorinated polypropylene resin DR-414P is a newly developed adhesion promoter for PP substrates, with good ester solubility and excellent adhesion to various PP substrates.

Specification

Key features

The solution is diluted and sprayed directly on the PP substrate, and then the topcoat is applied after drying;

Mix with resin to make a base coat;

It is recommended for use in coating systems and ink systems.

Application 

It has excellent adhesion effect on PP, PP/EPDM substrates;

It has good compatibility and can be directly added to acrylic, alkyd and other coatings;

Excellent interlayer adhesion to topcoats, such as polyester/melamine baking and polyurethane systems;

The solution has good low temperature stability (20% toluene solution, 5 °C);

Slightly soluble in 1,6 hexanediol diacrylate, can be used in ultraviolet curing system.

Recommended addition and Usage

When mixing with resin, test the optimal ratio.

It is dissolved into 30% by stirring toluene or xylene. For environmental considerations (prohibition of benzene), the solvent can be changed to butyl acetate or methylcyclohexane/butyl acetate = 1/1. Dosage 5-10% .

Storage

Keep away from heat and fire.

Store in a cool, dry and ventilated place with the container kept tight.

Store at 10 °C to 25 °C.

DR-414P and its solution are stored at 25 °C in the dark.

Package

Packed into 20kgs/carton or 20kgs/bag