Modbus RTU Protocol HMI PLC All In One 10 Inch 30DO Programmable Controller

HMI PLC All In One High Processing Speed 32bit CPU 408MHz RS485 COM Ports

Each PLC has optional COM port: 1 RS485 or 2 RS485 COM ports(one is changed from the default RS232 port), and a CAN port is optional to meet the needs of users to connect several types of equipment.

Paramaters of HMI Part:

size of HMI: 10.1"TFT

RAM:64MB(HMI when stores historical data, optional ferroelectric is required)

ROM:NOR Flash 16MB

CPU:32bit CPU 408MHz

Software: Coolmay mView HMI Programming Software

Paramters of PLC Part:

Digital I/O: Max 12DI/12DO

I/O level: Input: Passive NPN, public terminal isolated

Transistor output: Low level NPN, COM connect to negative; Relay output: Normally open dry contact

DO type and load: Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point COM; MR: 2A/point, 5A/12 point COM.

Analog I/O(optional): max 4AI/2AO

AI type(Optional): Thermocouple E/E_/K/K_/S/S_/T/T_/J/J_ / PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/

0~10V/ 0~5V/ 0~20mA/ 4~20mA/ mixed (QM3G-70FH/70HD/70KFH/100FH optional -5V~5V and -10V~10V)

software: Compatible with GX Developer8.86 and GX WORKS2

AI type(Optional): Thermocouple E/E_/K/K_/S/S_/T/T_/J/J_ / PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/

0~10V/ 0~5V/ 0~20mA/ 4~20mA/ mixed (QM3G-70FH/70HD/70KFH/100FH optional -5V~5V and -10V~10V)

software: Compatible with GX Developer8.86 and GX WORKS2

We are committed to providing you with a variety of solutions, such as ROM, Resolution, CPU, ect.