HMI PLC Combo Passive NPN 8 Channels High-Speed Counting Special
Customized PWM
HMI program simulation:
mView provides the function of simulating directly on the PC. You
can use this function to simulate the actions performed on the HMI
after planning HMI. On the one hand, it increases the convenience
of finding program errors, and on the other hand, it can save
downloading to the time HMI can connect to the controller. The
simulation function of mView is divided into two types: [On-Line
Run] and [Off-Line Run], as shown in the figure below.
Parameter: | Display | Dimension | 134*102*34mm | | Cutout size | 120*94mm | | Type | 4.3"TFT | | Feature | 60K-color resistive touch screen, supports portrait display | | Memory | RAM | 64MB | | ROM | NOR Flash 8MB | | CPU | 32bit CPU 408MHz | | I/O | DI/DO | Max 12DI/12DO | | DI/DO level | Input: Passive NPN, public terminal isolated
Transistor output: Low level NPN, COM connect to negative; Relay
output: Normally open dry contact | | DO type and load | Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point
COM; MR: 2A/point, 5A/12 point COM. | Analog I/O
(optional) | Max 4AI/2AO | | AI type (optional) | Thermocouple E/E_/K/K_/S/S_/T/T_/J/J_ / PT100/ PT1000/ NTC10K/
NTC50K/ NTC100K/
0~10V/ 0~5V/ 0~20mA/ 4~20mA/ mixed | | AO type (optional) | 0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed | | High-speed function | High-speed counting | Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz,
or 2 ABZ 60KHz + 1 AB phase 10 KHz | | High-speed pulse | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz.
High-speed counting + high-speed pulse < 480KHz | | Connection | HMI | Type-C HMI download port (can download PLC program through the USB
penetrating function), RS232 port | | / | | PLC | 1 TYPE-C, 1 RS232 (program port) | 1 RS485 or 2 RS485 COM ports (one of which is changed from the
default RS232 port);
1 WIFI (occupy default RS232 port) | | Software | HMI | Coolmay mView HMI Programming Software | | PLC | Compatible with GX Developer 8.86 and WORKS 2 |
Special customized PWM-analog output port
The following parameters need to be provided during customizing
selection:
The output voltage of the required PWM; The output frequency of the required PWM; Confirm the number of customized PWM, up to 4 channels of PWM can
be customized (specifically, it depends on the number of analog
outputs of the model selected by the customer). Customize whether PWM coexists with other analog quantities. (If
the product is additionally equipped with analog, analog output
terminals DA0~DA3 are a group, DA4~DA7 are a group. When QM3G
customizes PWM, the output frequency can only be installed with
other analogs in a group when the output frequency is only 21KHz ). -
|
