10.1'' TFT 24DI 20DO HMI PLC All In One 32K retentive register

Advantage:

◆ Upper computer programming software compatible with Works 2/GX Developer8.86 (supports Ladder diagram and SFC language, does not support structured programming/labels).

◆ Powerful, compatible with FX3G/FX3U/FX3S PLC, high processing speed.

◆ Military level 32 bit CPU adopted, which is faster and more adapted to industrial environment of high electromagnetic interference.

◆ Special encryption, prevent illegal reading thoroughly. 8-bit encryption, 12345678 as password can thoroughly prevent reading of ladder logic program.

◆ Clock supported, rechargeable battery adopted.

◆ Default With 1 HMI Downloading port, 2 PLC programming ports: one MiniB USB port with faster downloading speed; one Rs232 programming port with 8 mouse hole sockets, and 1 USB port.

◆ Support programming port protocol/Modbus protocol/Rs protocol/BD board protocol,

PLC communication with each other and other devices is easily achieved.

PLC Programming notice

The PLC is compatible with GX 8.86/Works 2 and below. If you use other versions of the software, incompatibility may occur.

When the PLC program is downloaded, there is a prompt error: Cannot specify the com port,

GX 8.86 software: Online - Transfer settings change com port;

Works 2: All targets - Change the com port in all connected targets;

If communication error occurs, cable is abnormal If prompted, remove it by powering off, detecting the cable, detecting whether the power is normal, or replacing the computer.