OEM Cisco/Huawei/ZTE/H3C compatible with 10G RJ45 UTP Cable 30m
Module 10G Copper Transceiver DescriptionSFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are
based on the SFP Multi Source Agreement (MSA).
They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T /
1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T
uses the SFP's RX_LOS pin for link indication. If pull up SFP's
TX_DISABLE pin, PHY IC be reset.
Features - Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
- Hot-pluggable SFP footprint
- Compact RJ-45 connector assembly
- RoHS compliant and lead-free
- Single +3.3V power supply
- 10 Gigabit Ethernet over Cat 6a cable
- Ambient Operating temperature: 0°C to +65°C
Cable Length | Standard | Cable | Reach | Host Port | | 10Gbase-T | CAT6A | 30m | XFI | | 5Gbase-T/2.5Gbase-t | CAT5E | 50m | 5GBase-R/2.5GBase-X | | 1000base-T | CAT5E | 100m | 1000base-FX |
Optical Parameters
| Parameter | Symbol | Min. | Typical | Max. | Units | Notes/Conditions | | Supply Current | Is | | 320 | 375 | mA | 1.2W max power over full range of voltage and temperature. See
caution note below | | Input Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | Referenced to GND | | Surge Current | Isurge | | 30 | | mA | Hot plug above steady state current. See caution note |
Low-Speed Signals | Low-Speed Signals, Electronic Characteristics | | Parameter | Symbol | Min | Max | unit | Notes/Conditions | | SFP Output LOW | VOL | 0 | 0.5 | V
| 4.7k to 10k pull-up to host_Vcc,
measured at host side of connector | | SFP Output HIGH | VOH | host_Vcc -0.5 | host_Vcc + 0.3 | V
| 4.7k to 10k pull-up to host_Vcc,
measured at host side of connector | | SFP Input LOW | VIL | 0 | 0.8 | V | 4.7k to 10k pull-up to Vcc,
measured at SFP side of connector
| | SFP Input HIGH | VIH | 2 | Vcc + 0.3 | V | 4.7k to 10k pull-up to Vcc,
measured at SFP side of connector |
High-Speed Electrical Interface
| High-Speed Electrical Interface Transmission Line-SFP | | Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions | | Line Frequency | fL | | 125 | | MHz | 5-level encoding, per
IEEE 802.3 | | Tx Output Impedance | Zout,TX | | 100 | | Ohm | Differential, for all
frequencies between
1MHz and 125MHz | | Rx Input Impedance | Zin,RX | | 100 | | Ohm | Differential, for all
frequencies between
1MHz and 125MHz |
| High-Speed Electrical Interface, Host-SFP | | Parameter | Symbol | Min | Typ | Max | unit | Notes/Conditions | Single ended data input
swing | Vinsing | 250 | | 1200 | mV
| Single ended | Single ended data output
swing | Voutsing | 350 | | 800 | mV | Single ended | | Rise/Fall Time | Tr,Tf | | 175 | | psec | 20%-80% | | Tx Input Impedance | Zin | | 50 | | Ohm | Single ended | | Rx Output Impedance | Zout | | 50 | | Ohm | Single ended |
Products Show
Packaging & Shipping
Factory Show
|
