S2 Black GPS Equipment For Land Surveying Voice Broadcast

land Meter GPS Mountain Slope Measurement Survey Grade Handheld GPS

Install The Battery Of Survey Grade Handheld GPS:

1. S series are all used press back cover,press the switch on the upper part of the back down,and then pull out,you can open the back                cover,please notice the place of anode and cathode when pit in the dry batteries or lithium batteries.

Power on,power off,system setting:

1. Power on: With the equipment off,hold the "Stop" button until the screen remains on and the voice ring(about 2 sec),“welcome to use            WangGan land meter”,appearance of“WangGan”brand trademark,boot successful.

2. Power off: 

①After booting,press the "Stop" button for 3 seconds in non-measurable state.

②When the shutdown page appears,press the 【Enter】 button to confirm the shutdown.

Unit setting:

①On the home page of boot,press the 【Settings】button to enter the settings interface；

②Press the▲▼button move to“unit setting”；

③Press the【Enter】button to enter；

④Press the▲▼button to fine tuning,long press the ▲▼button to quick adjustment.

⑤Press the【Enter】button to save,and press the "Stop" button to exit.

Terrain setting:

①On the home page of boot,press the【Settings】button to enter the settings interface；

②Press the▲▼button move to“parameter setting”；

③Press the【Enter】button to enter；

④Press the▲▼button to fine-tune to required gradient；

⑤After the adjustment is completed,press the "Stop" button to return.