Spiral Over the Side Single Phase Heater Excellent Chemical
Resistance PTFE Immersion Heater
Spiral Over the Side Single Phase Heater. Excellent chemical
resistance to aggressive acids.
The PTFE-sheathed spiral immersion heaters, resistant to most
chemistries. Contact us to choose your options and order.
Spiral Over the Side Single Phase Heater Excellent Chemical
Resistance PTFE Immersion Heater Description :
| Power(W) | Voltage(V) | Hot Zone(MM) | Total Length(MM) |
| 1000 | 220/380/415 | 180 | 430 |
| 2000 | 220/380/415 | 310 | 560 |
| 3000 | 220/380/415 | 420 | 670 |
| 4000 | 220/380/415 | 520 | 770 |
| 5000 | 220/380/415 | 640 | 890 |
| 6000 | 220/380/415 | 750 | 1000 |
Options Available
- Longer vertical lengths (cold zones).
- Polypropylene guards*: recommended for applications up to 180°F
(82°C).
- Fluoropolymer (PTFE) guards recommended for chromic acid or
solutions over 180°F (82°C).
- Special configurations.
- Longer wire and conduit lengths.
- Lower watt densities for highly viscous solutions and technical
acids.
FAQ
Q: Do immersion heaters use a lot of electricity?
A: Cons of immersion heaters. Heating water using electricity
is more expensive than heating water with gas.
A typical immersion heater uses three kilowatts of electricity an
hour, so it will cost the average house about 50p an hour to run.
Q: Why does my immersion heater keep burning out?
A: If air pockets develop in the tank, often due to a failure
to bleed out the tank completely before filling it up, the element
may be burning itself out without enough water. As a result, the
heating element could be failing faster and more frequently than it
should.
Q: Where is Surplus located?
A: Our office located in HongKong,Dongguan and Shantou City.Our
factory located in Shenzhen.
Q: Can I buy direct?
A: Yes,you can buy from Surplus Directly.
Q: Do you manufacture your products in house?
A: Most of our products are manufactured in-house at our
factory.Some accessory items are not.
Q: Can I get the riser on my L-shaped aquaculture heater
longer/shorter?
A: Yes.There is no price difference for making a heater with a
middle riser,but there maybe a cost adder for a longer riser.
Q: What Third Party Approvals do your products carry(CE?)
A: Almost all of our products are CE compliant.
Q: How late can you ship?
A: Normally 7 days after comfirmed the order.
RELATED SPECIES
| | | |
| METAL IMMERSION HEATER | PTC IMMERSION HEATER | QUARTZ IMMERSION HEATER |
| | |
| METAL HEAT EXCHANGERS | (PFA) HEAT EXCHANGERS | ANODE BASKET |
| | |
| PP TANKS | PP BARRELS | PP BAG FILTERS |
OUR FACTORY
| | |
| ENGINEER OFFICE | TOOLING DEPARTMENT | MACHING 1 |
| | |
| MACHING 2 | MACHING 3 | MACHING 4 |
| | |
Company Advantage
For more than ten years, our company has specialized in the
research and development and production of PCB and FPC
electroplating equipment, electric heaters, cold heat exchangers,
and coating on the surface of electroplating equipment.
We have collected advanced technologies and processes at home
and abroad for many years. With the practice and experience in the
PCB industry, the quality, stability and reliability of the
products are among the world's leading positions. Our company has
passed ISO9001: 2008 quality management system certification and
CQC: CE certification, is in line with the world, implements
scientific management, and implements international quality
standards.
