60FPS Fixed Focus MIPI CSI Camera Module Flexible FPC With Aptina
AR0130 1MP 720P 60FPS HD Fixed Focus Flexible FPC MIPI Camera Module With
Aptina AR0130
MIPI CSI Camera Module This is a 1MP MIPI camera module with Aptina AR0130.Aptina's AR0130
is a 1/3-inch CMOS digital image sensor with an active-pixel array
of 1280H x 960V. It captures images with a rolling-shutter readout.
It includes sophisticated camera functions such as auto exposure
control, windowing, and both video and single frame modes. It is
programmable through a simple two-wire serial interface. The AR0130
produces extraordinarily clear, sharp digital pictures, and its
ability to capture both continuous video and single frames makes it
the perfect choice for a wide range of applications, including
gaming systems, surveillance, and HD video.
Features
• Superior low-light performance both in VGA mode and HD mode
• Excellent Near IR performance
• HD video (720p60)
• On-chip AE and statistics engine
• Auto black level calibration
• Context switching
• Progressive Scan
• Supports 2:1 scaling
• Internal master clock generated by on-chip phase locked loop
(PLL) oscillator.
• Parallel output
Applications
• Gaming systems • Video surveillance • 720p60 video applications
Specification
Module No | SNS-FPC0130-V1 | Pixel Size | 3.75μm x 3.75μm | Effective Pixels | 1MP 1280(H) x 960(V) | Video output | Raw Bayer10bit/8bit | Active Array Size Video Rate | 60FPS | Image Sensor | 1/3" | Sensor Type | Aptina AR0130 | Lens view | FOV90°(optional),F/N(optional) | TV Distortion | <1% | AEC | Support | AEB | Support | AGC | Support | Operating voltage | AVDD:3.0~3.6V DOVDD:1.7~3.6V DVDD:1.7~1.9V | Operating temperature | 0～60℃ | Storage temperature | -20～70℃ | Dimensions | Customizable |
Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your
request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application
scenarios, resolution, size, and lens requirements. We will have a
professional team of engineers to assist you in choosing the most
suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to
confirm the details with you. Once the drawing is confirmed, we
will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it
is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we
will send the samples to you via DHL FedEx UPS or any other courier
methods, usually within a week.
|
