Maximizing Molybdenite Recovery With Collector M1001S: A Key Reagent For Efficient And Selective Copper-Molybdenum Ore Processing Operations

Product Name: Collector M1001S

Appearance: Yellow oily liquid

This product is insoluble in water and can be added directly to the stock solution or mixed with an emulsifier. It is typically added during the ball milling or flotation stage, with the specific addition location determined based on site conditions. The typical dosage is 2-100 g/ton of ore.

This collector is non-foaming and requires a higher amount of frother than other collectors such as xanthate.

• Successfully used in the flotation of molybdenite-containing copper ores
• Highly selective collector for copper-molybdenum sulfide minerals
• Improves molybdenite recovery and subsequent copper-molybdenum separation
• Used for flotation of low-alkalinity primary copper and copper sulfides
• Primary collector for copper recovery from copper slag in smelters
• Excellent pyrite capture under weak conditions
• Can separate copper and sulfur under low alkalinity conditions
• Excellent collector for flotation of high-sulfur copper ores

This product is non-foaming and must be used in conjunction with a frother or emulsifier.

Packaging: 200 kg/drum, 1000 kg/IBC drum

Storage: Store in a cool, well-ventilated area.

• Avoid strong oxidizing agents, strong reducing agents, and open flames

• Avoid dust and aerosol formation
• Avoid contact with skin and eyes
• Operators must be specially trained and strictly follow operating instructions
• Avoid dust accumulation
• Wear appropriate protective clothing, gloves, and goggles/face shield

Most of the reagent is combined with the concentrate and destroyed in subsequent processing operations. The remainder is transferred to the tailings. Discharge to water systems should be avoided.

• Avoid severe impact during transportation
• Shelf life is 36 months