3 Layers 250A Chicken Mesh Making Machine With Detection Device

3 Layers High Quality Poultry Chicken Mesh Making Machine

The primary and secondary voltages, the external voltage 380V enters from the primary voltage, the output voltage is about 7V, its instantaneous current is about 250 A, poured by high-quality epoxy resin, with good sealing. The quality of the transformer is mainly determined by the silicon steel sheet and the copper wire, followed by the water cooling system, which can ensure the continuous production for 24 hours.

The lower electrode seat is made of brass with fastening bolts on the surface and water-cooling channels inside. The lower electrode is of high chrome bronze, square and replaced on all sides. For a long time of heat and wire wear, the surface will appear gullies, the gully reaches a certain depth, the gully can flip the other side. If all four faces have gullies, all the electrode seats can be removed and used by a milling machine. The electrode adjustment can be achieved by adjusting the electrode voltage block.

Line feeding mechanism (single material warehouse rotary turntable) - -the whole is divided into steel wire storage warehouse and material unloading device.

The latitude line is a pre-cut straight material steel wire, the servo drive wire plate will send the steel wire (one) between the electrodes for welding, after the welding of a row of latitude line, step into a grid, fall a latitude line at the same time, welding, back and forth many times, a finished mesh piece completed.

The mechanism is equipped with a detection device, in case of no wire failure, the equipment will automatically alarm, until the manual adjustment, can resume production, which greatly reduces the equipment failure and mesh damage rate.

Mature and stable unloading structure design to ensure smooth unloading, sufficient storage of unloading warehouse, reduce the frequency of manual discharge.