Accuracy 0.01mm 250KVA Fence Mesh Welding Machine Automatic 3D Bending

Automatic Bending Steel Rebar 3D Fence Mesh Welding Machine

A net pulling mechanism is composed of a linear slider track, a hook device and a net pulling trolley. The net pulling trolley is driven by servo motor. After deceleration through precision reducer and gear, the rotation is converted into linear motion by gear rack pair. The theoretical control accuracy is 0.01mm.

When the warp wire is sent to the number of progress, the hook device lifts and clamps the mesh. After the welding cylinder is lifted, the pull-net car steps further to weld the next mesh. Hook the mesh, loosen the hook, return to the next hook, and wait for the next step. When the mesh pulling mechanism can not pull out the mesh at one time, the mesh pulling car will return to the second hook position of the current mesh according to the set step return position until the whole mesh is welded.

This device is the core part of Fence Mesh Welding Machine. It is mainly to weld the meshes at a high speed by cooperating closely with others device.

The welding electrodes head of Fence Mesh Welding Machine use high-quality materials, which make them more wearable and with better conductive, and also have a long life, reduce production costs.

The improvement of design of welding transformers of Fence Mesh Welding Machine meets the demand to weld continuously wires of 8+8+8mm at a high speed at the moment when saving energy.

Fence Mesh Welding Machine electrodes adopt circulating water cooling, which extends their service lives, and ensures the long-term operation of the equipment.