Rubber Air Spring Parker 9109400 Single Convoluted Air Bellows with Aluminum Plate

Rubber Air Spring Parker 9109400 Single Convoluted Air Bellows with Aluminum Plate

Product Introduction 

Air springs are extremely durable, precisely engineered, and cost-effective for a wide range of drive and vibration isolation applications. Thanks to their proven design, fabric-reinforced neoprene or natural rubber flexure construction, and corrosion-resistant end mounts, air springs offer the highest quality and performance. As vibration isolators, air springs effectively reduce the damaging effects of vibration. They can simultaneously isolate vibration and adjust the load height to achieve consistent vibration isolation under varying loads.

Product Dimensions 

Dimensions - Plate Diameter: 110 mm

Dimensions - Center Distance: 93 mm 

Dimensions - Design Height: 78 mm

Dimensions - Natural Diameter: 120 mm

Air Connection: G3/8

Structure: single convoluted

Material: rubber and aluminum

OEM Cross References 

Parker Air Bag: 9109400

Firestone Air Bag: W01-R58-4050

Firestone Air Bag: W01R584050

Firestone Air Bag: W01 R58 4050
Dunlop Pneuride Air Bag: 4 1/2"x1

Dunlop Pneuride Air Bag: 4 1/2'x1

Dunlop Pneuride Air Bag: 4 1/2x1
Dunlop Springride Air Bag: SP2334

Dunlop Springride Air Bag: SP 2334

Dunlop Springride Air Bag: SP 23 34
Contitech Air Bag: FS 44-5 DI

Contitech Air Bag: FS 445 DI

Contitech Air Bag: FS 44 5 DI
Norgren Air Bag: PM/31041

Norgren Air Bag: PM31041

Norgren Air Bag: PM 31041

About Air Spring Production Knowledge

• Rubber lining is a retractable inner mold with different shapes formed by the polymer properties of vulcanized rubber and high-strength fiber cloth. It is a product made of vulcanized rubber and fibers. It is compressive, elastic and airtight. After being filled with compressed air, the air bag will expand to meet the design requirements of its cross-section. Under the premise of ensuring quality, if it is used improperly, the service life of the air spring will be greatly shortened.
• Due to its low quality, good comfort and fatigue resistance, the rubber air spring has the advantages of long service life, vibration reduction and noise reduction. Widely used in industrial machinery, instrumentation and other equipment.
• The production process and production process of the surface fabric of the air spring machine penetrate into the gap of the fabric, and the bonding of the process rubber and the fabric of the rubber rope formed by tight carding. Reduce shrinkage: The elastic deformation of the rubber should be reduced, so that the surface of the pressed rubber wire is smooth and the dimensional change is small. The air spring film required for the production of air springs usually uses a three-roller air spring machine. Through this process, it embodies the protection of the air spring in many ways, thus prolonging its service life.

FAQ

The Real Pictures