5000kg 5 Ton Load Pmeumatic Triple Convoluted Airbag Jack With Long Handle

5000kg/5 Ton Load Capacity Pmeumatic Jack Triple Convoluted Airbag Jack With Long Handle

Specifications and Detailed Technical Parameters

With 5 tons/11000lbs capacity, a lifting range of 15cm-40/48cm, and a lifting time of only 3-5 seconds, this triple bag air Jack is compact, powerful, and very fast to use. Inflated with compressed air, they are easy to handle. The pneumatic jack is one of the most useful tools in the body shop.

Labor Saving Jack
Heavy Duty Construction
Secure Usage
Operable Handle

Matters needing attention

1. Remeber that if the balloon rises to themaximum (Stop to rise), imediately shut off the valve seitch, stop gas supply.
2. When used, the jack should take a position outside of center for 10-20cm, that is, Jack should be put under the car just a little
3. The safety value has been set as 10kg/cm3. If being exceeded, the pressure will be automatically discouraged . If it doesn’ t work, please correct it again.
4. When not in use, it should be placed indoar and mustn’ t be placed outdoor. And please use the supplied aocessories.
5. It is strictly prohibited to disassemble the jack ballon subject; otherwise there will be consequence to bear. At the sme time, the manufacturer is not responsible for the after sale service.

The working principle of the air bag jack

The airbag type pneumatic jack is generally composed of 3 convoluted, two convoluted or a single convoluted of airsprings. The main working principle is to use a 5-8KG pressure air compressor to inflate the car to lift it up. , Easy and labor-saving: due to the pneumatic lifting, no manpower is required, it is easy and convenient; 2. The lifting and lowering are extremely fast and stable.

Product Picture

FAQ

1. Are air jacks worth it?
In general, pneumatic air jacks are much more professional than car jacks. The rubber parts get air from the pneumatic system to get to the working height. This means, you can easily lift any car, making the underbody jobs much easier.

2. What is air bag jack?
What is an airbag jack? The airbag jack is made up of one or more Inflatable lifting cushions for heavy loads. They inflate using an air compressor or, if it is a car lift, through the exhaust gas

3. How much pressure do air jacks need?
As most workshop air compressors are available in between 8 - 12 BAR (116 - 174 PSI) this is what these air jacks are specified to work with. At as low as 8 BAR (116 PSI), these air jacks will lift 402 KG (886 LB) each, and in a 4 - jack system, it results in a full 1608 KG (3545 LB).