Yokohama S-160-2 Double Convoluted Rubber Punching Air Bags Spring

Yokohama S-160-2 Double Convoluted Rubber Pneumatic Parts Air Spring

Cross Reference

Yokohama S-160-2

Yokohama S-160-2R

Yokohama  S160-2

F-160-2 Specification and Technical parameters

Packaging Information

Net Weight:1.85 KG
Gross Weight:2.35 KG
Package Size:110mm*220mm*220mm

Airbags are used in punching equipment

Punch equipment is very common in life. It is a special equipment for the production of some molds or some parts. It is precisely because the utilization rate of this equipment is relatively high, so it is also necessary to pay attention to the service life of the equipment, which affects the life of the punch press. An important part is the airbag. A good punching airbag can protect the punching machine from excessive loss.
The biggest role is to buffer the collision of the punch, so that other parts of the punch are well protected and will not cause the punch to break or the parts to loosen.
It can also ensure that the back-and-forth movement of the punch is regular, within a certain reasonable range, and not free to play at will, thus protecting the punching equipment well and allowing it to be used for a longer time.

Therefore, when purchasing an airbag, it is necessary to ensure the quality of the punch, especially to achieve the use of the punch, and there should be no air leakage, and it can be used for a longer time to ensure that it can provide a good protection to the punch.
At the same time, when purchasing, you should also pay attention to whether it can be replaced in time. If the airbag has reached its service life, it needs to be replaced in time to avoid the failure of the airbag, which will lead to the deformation of the punch and the inability to function.

The related picture of F-160-2