AIRSUSTECH Air Spring Balloons 230116-1 One Convoluted Rubber Bellows Without Flange Ring

AIRSUSTECH Air Spring Balloons 230116-1 One Convoluted Rubber Bellows Without Flang

Specifications and Detailed Technical Parameters: 230116-1

❶Nut / Blind Nut

The Long Of The Nut:25 mm

Top Cover Plate Screw number: 8 pcs

Bottom Cover Plate Screw number : 8 pcs

Top Cover Plate Screw (Nut) Tooth : M10

Screw Center Distance of Top Cover Plate :

Bottom Cover Plate Screw (Nut) Tooth : M10

Screw Center Distance of Bottom Cover Plate :

❷ Gas Hole / Air inlet / Air Fitting

Gas Hole / Air inlet : G1/2

❸ Cover Plate

Top Diameter: 172 mm

Bottom Cover Plate Diameter: 172 mm

❹Rubber Bellows

Rubber Bellows Natural Diameter : 150 mm

Rubber Bellows Natural Height :115 mm

❺ Bumper block / Buffer block

Without Bumper Block

❻ Girdle Hoop / Girdle Ring

Without Girdle Hoop

The related picture of 230116-1

Working circuit principle of rubber air spring

When the rubber air spring works, when the inner wall is filled with air compression, an air compression column is generated. The reasonable bearing area of the air compression column increases, which indicates that the bearing capacity of the torsion spring increases. Accompanied by the shock load vibration load ascension will occur torsional spring the relative height of reduce at the same time the lining of capacity and bending stiffness of torsional spring ascends the lining are reduced greatly, the relative height of torsional spring up around the internal capacity expansion, bending stiffness of the torsional spring to reduce the lining of the air column reasonable bearing area reduced, so the torsional spring bearing capacity to reduce.
In that way, the air spring in a reasonable travel arrangement, the relative height of the air spring, the inner wall capacity, bearing capacity with the growth and reduction of vibration load has a stable rigid transmission, amplitude and vibration load manipulation. It can also adjust the size of the bending stiffness and bearing capacity of the torsion spring by increasing or decreasing the air flow, or complete automatic control and adjustment of the auxiliary brake air chamber. Therefore: AW=F/P

AW--- rubber air spring reasonable total area (mm2) F - rubber air spring load (kN) P - rubber air spring gas pressure (MPa)

FAQ: 

Q1. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q2. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q3: How about the quality of your product?

A: Our products are certified to ISO/TS16949:2009 international quality standards. We have very strict Quality Control Systems.