Electric Anchor Windlass & Mooring Winch with Single Gypsy Double Drum

Electric Anchor Windlass & Mooring Winch with Single Gypsy Double Drum

Description:

Electric Anchor Windlass & Mooring Winch with Single Gypsy Double Drum, this high-performance system is a critical component for ship mooring and anchoring operations. We specialize in manufacturing customizable electric anchor windlasses and mooring winches, compatible with all standard sizes of anchor chains and mooring ropes. The configuration—including the number of gypsies and drums—can be tailored to meet end-user requirements.

Main Technical Specifications:

Material: Mild Steel, Casting

Power: Electric

Classification Certificates:CCS, NK, BV, ABS, DNV, LR, KR, BKI, IRS, RS, Etc.

Built as per Classification Rules for sea-going ships.

Φ32 Single Gypsy Double Drum Electric Windlass

Technical Parameters:

1. Anchor chain diameter: Φ32mm

2. Rated pull load: 43.5kN

3. Working speed: 9m/min

4. Mooring load: 30kN

5. Support load: 261kN

6. Motor power: 16/16/11KW

7. Speed: 9m/min

8. Gypsy number: Single

9. Delivery time: 90 days

10. Warranty period: one year after delivery

11. Color: customer specified

12. Power supply: AC single-phase 110V, 220V, 240V

AC three-phase 220V, 380V, 440V, 660V

13. Composition: Mainly composed of base, wall frame, double anchor sprocket, double clutch, double brake, twisted pair cable drum, reducer, electrical control box, master controller, double anchor brake, double roller, etc.

Purpose:

The product is installed on the main deck of the official law enforcement ship and the bow and stern of the ship. The cable is taken up or anchored when sailing, and the cable is tightened or anchored when the ship is stopped. It is a safety equipment for the ship.

Precautions for installation and maintenance:

1. The instruction manual must be kept by the buyer. We sincerely invite the shipowner to inspect the whole process and performance of the windlass in person. After the windlass is confirmed to be qualified, it will be packed and shipped. The operator must master it all!

2. The installation of the windlass on the ship should ensure that the wrap angle between the anchor chain and the sprocket is 117-120 degrees.

3. The quality of service wins the satisfaction of users, and it should be installed and qualified by professionals.

4. It should be ensured that the three eyes (chain cylinder, chain brake, and sprocket) are in a line when the anchor chain is drawn out.

5. The engine, hull, and electrical personnel should be commissioned according to the instructions! The windlass should be able to work continuously for 30 minutes under the rated tension and rated speed, and should be able to work continuously for 2 minutes under the action of an overload tension of not less than 1.5 times the rated tension; in addition, the windlass should also be equipped with an overload protection device, which can be turned when overloaded. To medium speed.

6. Carry out technical training for operators according to the requirements of the shipyard and shipowner!

7. It should be able to rotate down and down and be stable and fast during operation.

Main Technical Parameters:

Drawing of Single Gypsy Double Drum Electric Anchor Windlass Mooring Winch Ship Deck Equipment