Higher Accuracy Rotary Pneumatic 4 Jaw Laser Chuck For Fiber Laser Cutting

1. Description

The chuck is a four-jaw full stroke main chuck specially designed for laser pipe cutting equipment. This has a rotating independent spindle in the middle, which can firmly hold the workpiece and rotate simultaneously. After the base of the product is fixed, it only needs to add the supporting motor and connect with the gear, and then connect the compressed air source (0.3-0.9mpa) to clamp the workpiece and drive the workpiece to rotate. Chuck for full stroke operation, no need to adjust the position of the four claws. Can clip round tube, square tube, rectangular tube, improve production efficiency. Compared with similar products on the market, the chuck has higher rotation accuracy and repetition accuracy, as well as higher clamping force, its center height of 315mm, clamping range of 8-228mm.
The products can be widely used in special laser pipe cutting machine and other pipe processing machine system.

2. Performance Parameters

Note: above numbers are standard parameters. We can also design products according to clients' special requirements.

​3. Dimensions

4. Advantages

5. Our Service

6. Production Line