Laser Cutting Machine Laser Pneumatic Chuck With Square Hole

 Descripition
  When the laser pipe cutting machine cuts and processes pipe fittings, it is necessary to clamp and fix the pipe fittings with a chuck.
  The full-stroke chuck generally has two sets of jaws that can be opened and closed respectively.
  However, when it is used to clamp thin pipes or fragile pipe fittings, the stroke of the jaws is not easy to control.
  The processed pipe fittings are flattened or broken and the processed pipe fittings are scrapped.
  In response to this problem, the DF series full-stroke square hole chuck - G620DF-245 chuck is launched.

Performance parameters
Model	G620DF-245
Diameter/Jaw stroke	236MM
Max. clamping force	210KG/0.6MPA
Allowable pressure	0.2-0.9MPA
Limit speed	150R/MIN
Clamping range	Φ6-Φ242MM
Central height	315MM
Moment of inertia	5.2KG/M2
Weight of rotating part	120KG
Whole weight	250KG

 

 

 

 

Dimensions
Model	A	B	B1	C	D	E	F	G	H	J	S
G620DF-245	420	315	624	662	220	60	380	403.5	245X245	444.5	18X22

 

 Advantages

  1. High transmission efficiency and synchronization accuracy

  2. In the case of the same size of the chuck, the applicable size range of the processed pipe is wider. It can be effectively used to clamp thin pipes or fragile pipe fittings to prevent flattening. Market demand

  3. The installation position of the reducer can be adjusted arbitrarily

  4. Reduce the difficulty of processing and manufacturing, which is conducive to mass production; better dust-proof effect and stronger pollution resistance