HOWO Heavy duty 10CBM to 14CBM Rear Load Compactor Garbage Removal
Truck You can throw away as much as you need without leaving unpleasant
smells or unsightly dumps around your facility. Your daily budget
will not notice the junk compressor. The advanced functions of
loading, compaction and transportation can certainly meet your
needs. The light truck model makes the collection process simple
and efficient, making the light truck model popular all over the
world. | Model | HOWO 10m3 Garbage Compactor Truck | | Gross weight kg | 16000 | | Curb weight ( kg) | 8000 | Engine | Make: SINOTRUK Diesel: 4-stroke direct injection diesel engine Model: WD615.62 266HP EURO II emission standard, 6-cylinder in-line with water
cooling, turbo-charging and inter-cooler Bore x Stroke: 126mm x 130mm Maximum output: 266HP(196KW) at 2200rmp Displacement: 9.726L Fuel: Diesel | Cab | HW76, Extended Cab,up/down and front/back adjustable steering
wheel,new European style whole heating and ventilating system, with electronic controlled model, with four points suspension & absorber and stabilizer equipment, all the truck with the double-locking
safety belts and outside sun visor Left Hand Drive Model | | Transmission | HW19710, SINOTRUK 10 forward & 2 reverse manual gearbox | | Steering Gear | ZF8198, German ZF hydraulic steering with power assistance | | Clutch | Single plate φ430 diaphragm spring clutch | | Number of axle | 2 | | Front axle | HF7 STEYR/HOWO drum brake front axle, axle loading capacity is
7000kg | | Driving axle | ST16 Rated loading capacity:16T, Ratio:3.93/4.42/4.80/5.73 | Front/Rear track(mm) | 2022,1830 | | Overhang front/rear(mm) | 1500/2200 | | Wheel base (mm) | 4600 | | Tires | 295/80R22.5 | | Approach/departure angle | 16/15(°) | | Maximum speed(km/h) | 102 | | Fuel Tank | 400L | | Suspension | Steer Axle: Parabolic springs with shock absorbers and stabilizer
Drive Axle: Parabolic springs with divided balance shaft and
stabilizer | | Upper body | Volume 10 cubic meters, Q345 high-strength steel, side 4 bottom 4,
compression standard with PLC automatic control, long source pump,
long source / Zhongmei multi-way valve, double electric control on
both sides, with cab operation, with integrated molding hanging
barrel Turn the mechanism. | | Electrical System | Voltage: 24V Batteries: 2x12V 165Ah Starter: 24V, 5.5KW Alternator: 28V/80A | | Braking System | Service brake: Dual-circuit air brake Parking brake: Spring brakes on rear axle Auxiliary brake: Exhaust valve braking(EVB) | | Color | Standard: red, yellow, green, white, blue, black Optional: others you liked | | Overall Dimension(L X W X H mm) | 10300×2496×3048 | | Options | Electrical tilting cab MTCO tachographs AC/ABS |
The heavy waste of 10CBM was re-buried by sanitary engineers and
loaded along the nearby streets. The garbage from the garbage truck
of the rear loader compactor is loaded into the hopper at the rear
of the rear loader. The hydraulic cylinder operates the compaction
mechanism, which takes the garbage out of the hopper and puts it
into the truck body. As more and more garbage enters the human
body, more and more garbage is pressed. Since the compaction unit
is located on the outside of the truck body, it can prevent garbage
from falling off the truck when the truck is fully loaded or
driving. After the truck is full, the driver dumps the garbage into
the garbage bin. The rear of the truck tilts like a dump truck, and
the hydraulic cylinder moves the compaction plate away. Then dump
the garbage out of the truck, and then dump it out with a hose. |
