Aluminium Alloy Extra Wide Carpet Transition Strip Interior Decoration

Aluminium Alloy Carpet Profile Trim Stripes Aluminum Tile Trim Interior Decoration

Carpet laying workflow:
1. Before laying the floor, the ground should be cleaned first, leaving no debris such as stone or wood chips.

2. The tape used for the carpet must be laid flat, and the joints must be glued firmly. It can be pasted with double-sided tape with adhesive on both sides, cover the adhesive layer with a plastic film, peel off the film during use, and paste it on the adherend.

3. Note that the junctions around the carpet and the edge of the wall should be close to avoid the phenomenon of separation from the seam and edge warping.

4. The pattern of the carpet interface should be coherent and consistent in color, and the joints should be concealed and not exposed.

Block-shaped carpets are more convenient to lay and clean. Full-paved carpets can avoid the troubles of carpet sliding and dust accumulation at the bottom, but it takes time and effort to clean, so it is best to figure out which carpet laying method is more suitable for you. aluminium alloy carpet profile Trim Stripes are the best for decorating the edges of carpets.