2019 Ag Rapid Test Kit Neutralizing Antibody Rapid Test The Storage Temperature

The storage temperature is 2 °C ~ 30 °C, and the validity period is 12 months.
The aluminum foil bag is valid for 1 hour.
Production batch number: See label for details.
Expiration date: See label for details.

Sample Requirements

1. Serum, plasma or whole blood samples are collected.
2. The precipitates and suspended solids in the sample will affect the experimental results and should be removed by centrifugation.
3. Anticoagulation: heparin anticoagulation, EDTA anticoagulation, sodium citrate anticoagulant effect is not obvious.
4. Blood collection should be carried out by a professional. Serum/serum/plasma tests are recommended. In urgent or exceptional circumstances, a patient's whole blood sample can also be used for rapid testing.
5. The storage time of serum and plasma samples at room temperature shall not exceed 8 hours.
It can be stored at 2-8 °C for 5 days and below -20 °C for 6 months, but repeated freeze-thaw should be avoided. Whole blood samples should not be frozen and should be stored at 2 °C to 8 °C for no more than 48 hours.

Test Method

Read the operating instructions carefully before testing. All reagents should be returned to room temperature prior to testing, and testing should be performed at room temperature.
1. Remove the test card from the box and use it within 1 hour.
2. Add 20 L of sample (serum, plasma, or whole blood) to the filled well of the test card, add 2 drops (~60 L) of sample buffer, and then start timing.
3. React at room temperature for 10-15 min and then read the results. Invalid after 20 minutes.

Interpretation of Test Results

Test Card Description:
1. Invalid result: The quality control line (c line) is invalid and needs to be retested.
2. Negative result: The appearance color of the detection line (T line) is higher than or equal to the reference line (R line), the quality control line (C line) and the reference line (R line).
3. Positive results: The red band can not see the test line (t line) or red band, the test line (t line) is lower than the reference line (R line), the quality control (c) line and the reference line (R line) are colored.

Limitation of Test Method

This kit is for qualitative analysis and is intended for in vitro diagnostics only.
2. Make sure to add an appropriate amount of sample for testing. Too much or too little sample size can lead to inaccurate results.
3. Hemolysis, blood lipids, jaundice, sample contamination, etc. may affect the test results and should be avoided as much as possible.
4. The test results of this reagent are for clinical reference only and shall not be used as the sole basis for clinical diagnosis and treatment. All clinical and laboratory results are combined to make a final diagnosis of the disease.

Precautions

1. This product is only used for in vitro diagnostics.
2. This product is a disposable product and cannot be recycled.
3. Carefully read the instructions before operation, and carry out experimental operations in strict accordance with the reagent instructions.
4. Avoid experiments under harsh environmental conditions (including 84 disinfectants, sodium hypochlorite, acid, alkali, acetaldehyde and other high concentration corrosive gases, dust, etc.). Laboratory disinfection should be performed after the end of the experiment.
5. All samples and reagents used should be considered potentially infectious substances and disposed of in accordance with local regulations.
6. Reagents should be used within the validity period indicated on the outer packaging. The test card should be removed from the aluminum foil bag as soon as possible after removal to prevent moisture.

Logo interpretation

Company profile