4000 times Splicing Machine Electrode

Fearure:
•good quality and long-term to use
•used for all kings type fusion splicer
•Discharge times: 4000 times

Change electrode method:
•First, must confirm the welding machine in a shutdown state, take the electrode
chamber protective cover, screw loosen the fixed electrode extraction electrode; then release the electrode silk top, remove the
lower electrode.

•Secondly, the installation of new electrode, the operation steps and the method of removing the electrode is the opposite, in
turn, can be operated. The two electrode tip clearance requirements for : 2.6 + / - 0.2 mm.

•Finally, in the assembly process, not can touch the tip of the electrode and to prevent damage to the electrode, and avoid
electrode fall into the machine internal damage caused by. After replacing the electrode, the arc position should be calibrated