Retractable Material Cantideck 4200mm Width Construction Loading Platforms MLP4200
|
|
4200mm Width Retractable Material Cantideck MLP4200 Used At High-rise Construction Site
Supporting Structures for the Cantideck and floor of the structures from the load deck.The calculation of the strength of the supporting structures shall be in accordance with the approved design code for construction structure. 2 Supporting structures should be structurally adequate to sustain the loads on the platform, including at the anchor points. The loads imposed by the loading platform on the permanent support structure should be reviewed and "signed off" by the building's structural designer. 3. If the supporting structure consists of hollow slabs, bearing plates recommended by the slab manufa- cturer or designed by a suitably qualified engineer should be used. 4. Holes drilled in slabs for anchoring should be at locations recommended by the slab designer or, if this is not possible, at locations where a suitably qualified engineer has determined that the structural integrity of the slab will not be affected. 5. The retractable loading platform should not be installed on the cantilevered supporting structures such as balconies and roof eave, etc.
Models The standard props allow a minimum height of 2400mm and a maximum
height of 3300mm.Please consult with your dealer for other special
requirements. We can design special props according to your
requirements. Furthermore, MLP 2200-L, MLP 2200-H, MLP 2600,MLP
3200, MLP 4200 can also be fixed to the concrete slab with bolts
through slabs according to actual needs.
Forces on the Building or Structure In the site condition, the “H” frame may keep a distance E from the slab edge. The forces on the building for three different distances “E” are listed in Table 2. According to the different distance “E”, the different max- imum allowable SWL are also listed in Table 2. The SWL corresponding to SWL the different distance E are also painted in the H beam of the stationary frame.
Before installation of the, make sure that the concrete slab and the ceiling of the building must have enough strength to bear the forces RA, RB, RC from the load deck.
Forces on the Building or Structure props or the fixing anchoring bolts. The forces on the ceiling or the slab floor of the building can be provided.
Cantideck Features 1. Easy pull/push system 2. Max. outboard length: 5.3m 3. Max. load capacity: 5ton 4. Platform width: 3.2m 5. With adjustable props for different floor heights 6. Compact design makes the transportation & installation much easier 7. With easy locking system 8. All pins are with chains to keep them from falling or losing
Application The CantiDeck is specially designed for coping with the challenges of multi-story construction sites. Our crane loading decks make access for tools and materials to different levels of multi-story construction sites safe and simple, while increase the working efficiency of tower cranes.
Support Props Height your dealer for other special requirements. We can design special props according to your requirements. Furthermore, MLP 2200-L, MLP 2200-H, MLP 2600,MLP 3200, MLP 4200 can also be fixed to the concrete slab with bolts through slab if the customer needs.
Function MLP series retractable loading deck is a unique product to improve
materials handling efficiency and safety for the multi-storey and
high rise construction sectors. It offers a cost effective method
of delivering goods to different
|
| Product Tags: Construction Material Cantideck 4200mm Width Retractable Cantideck |
|
3.5m Fixed Type Platform Crane Loading Deck FMLP3500 Width 3500mm Full Load Certificate |
|
2.0m Fixed Type Platform Crane Loading Deck FMLP2000 Width 2000mm Full Load Certificate |
|
Max Load 5000kg Retractable Crane Loading Deck MLP4200-H Width 4200mm With 2/4 Props |
|
Sand Blasting Crane Loading Deck MLP3200-H Width 3200mm With 2/4 Props |
|
Epoxy Paint Crane Loading Deck MLP2800-H Width 2800mm |
|
5 Ton Load Capacity Crane Loading Deck MLP2600-H Width 2600mm |