360W 365W 370W 9BB Mono PERC Half Cell Panels 166×83mm

FSM360~FSM370M60H (360W/365W/370W) 120*9BB MONO PERC Half Cell PV Module

Electrical Characteristics under STC (STC: Irradiance 1000W/㎡, Cell Temprature 25℃, Air Mass 1.5)

Mechanical Characteristics

Key Features

• Typical 144PCS of M6 mono PERC half-cut solar cells with combination of series circuit and parallel circuit to eliminate hot spot risk.
• 9BB Mono Half-Cell adopts PERC technology to guarantee higher output power and higher module efficiency.
• Mono PERC Half-Cell PV module offers better temperature-dependent performance and less shading effect on the energy generation.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Advanced glass and cell surface textured design ensure excellent performance in low-light environments (e.g. early morning, dusk and cloud, etc).
• Anti-reflective coated glass to increase module efficiency up to 2%, and improve self cleaning ability.
• Three channels of EL automatic detections, four times visual inspections and power test before packing.
• Full production from automatic equipment and production lines to eliminate human errors.
• MES system applied on production lines to ensure products data searchable and traceable.
• Certified to withstand: front side max. 5400Pa; rear side max. 2400Pa as per IEC61215 and IEC61730 standards.
• 12 years power output no less than 90% and 30 years power output no less than 80% based on around 0.55% annual power degradation.

About FINERGY

1. FINERGY only sources raw materials from Tier1 suppliers which passed the strict tests in our own factory laboratory. We have to provide dependable quality products to customers as well as reliable long period warranties.

2. FINERGY has accumulated rich experience of solar panels manufacturing. We also cooperates with design and research institutes to study and develop new technology adopted on solar panels for efficiency improvement.

3. FINERGY made large investments on automatic equipment and production lines since 2016. The advanced quality inspection facilities are combined with production lines together. Besides this, MES system was applied online to manage and record products data information. It's available for us to save waste and improve production capacity.

4. FINERGY has 6 production lines in factory now. The annual production capacity has reached 800MW now. Hundreds MW of solar panels are produced and shipped from us every year. The proven products have been installed in more than 40 countries all over the world.

5. FINERGY already set up sales networks in Asia, Middle East, Europe and South America. The customers can benefit from our collaborations depending on higher quality, price/ performance ratio.

Automatic Production

Workshop Environment

QC Inspection