9BB Single Crystal Silicon Solar Cells 450W

FSM440~FSM450M72H (440W/445W/450W) MONO PERC 144 Half Cells PV Module

Electrical Characteristics under STC (Irradiance 1000W/m², Cell Temperature 25℃, Air Mass 1.5)

Mechanical Characteristics

Technical Descriptions

• 144PCS M6 mono PERC half-cut solar cells connection in series and parallel to eliminate hot spot risk.
• 9BB mono PERC solar cells to guarantee higher output power and higher module efficiency (up to 20.3%).
• Mono PERC Half-Cell PV module design reduces internal power loss and offers better temperature-dependent performance.
• At least 50% power generation gain even when half of the panel is shaded.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Anti-reflective coating glass to increase module efficiency up to 2% and improve self cleaning ability.
• Full production from automatic equipment and production lines to eliminate human errors and improve product quality.
• Certified to withstand: front side max. 5400Pa and rear side max. 2400Pa following with IEC61215 & IEC61730 standards.
• Three channels of online EL inspections and power test before packing.
• Intelligent MES system applied together with production line for product data management and tracing.
• Optimal vertically packing solution for safety of long distance transportations.
• Around 0.55% annual power degradation and 30 years linear power damping warranty

How to judge FINERGY solar panels quality?

1. FINERGY solar panels are produced from automatic equipment and production lines absolutely. Thus, the perfect visual effect has no damage, dirty and scratch. Each panel delivered to customer is QC PASS sealed on the back.

2. FINERGY solar panels are vertically packed and loaded on pallets to ensure the safety for long distance transportation. The packing is designed to fullfill the container space for sea shipment. It's available to save the cost of freight.

3. All the materials for FINERGY solar panels manufacturing are sourced from Tier1 manufacturers directly. Then, the final products can provide excellent performance and long lifespan both.

4. FINERGY solar panels have been CE, TUV and CQC approved for global markets. The samples will be sent to CPVT laboratory to check every 3 months.

Intelligent Workshop

EL Detection

Visual Inspection