Top Printing Fixed Printing Slotting Die-Cutting Paste Box Linkage
Line
Machine Introduction of Flexo Printing Machine
1. The whole machine is designed and manufactured in accordance
with high requirements, high performance and high safety.
2. The electrical accessories and main parts of the whole machine
are imported from Europe, America, Japan and other countries, which
fully reflects the high quality and stability of the machine.
3. The whole machine is controlled by an intelligent computer, and
the touch screen data setting device does not need to be adjusted
manually.
4. The sticky part adopts an electric peristaltic pump, which is
easy to maintain. (Optional American VALCO glue spray system)
5. The continuous paper-beating device in the paper-making section
makes the dovetail effective trimming.
6. The gluing part adopts vacuum suction and conveying, with
precise crimping wheels to ensure high-precision gluing.
7. Counting and discharging part, high-speed counting and
separation.
Parameter Flexo Printing Machine | Maximum speed | 230pcs/min | Maximum feeding size | 1200mm×2800mm | | Skip feeding | 1500mm×2800mm | | Minimum feeding size | 320mm×600mm | | Maximum printing size | 1200mm×2760mm | | Paper feeding precision | ±1.0mm | | Printing precision | ±0.5mm | | Die cutting precision | ±1.0mm | | Slotting precision | ±1.5mm |
Main units | Leading edge paper feeding unit ⑴ It can feed paper continuously or at intervals (with counter).
⑵ Sun provides the most advanced system, which can adjust the paper
feeding stroke and reduce the pressure of the paper pulling roller. | | Printing unit
⑴ The printing roller is made of high-quality steel, the surface is
ground and hard chrome plated.
⑵ Balance correction, stable operation.
⑶ Plate hanging on the reel adopts locking devices on the left and
right sides to make the plate hanging accurately aligned.
| | Slotting unit
⑴ The creasing shaft is made of solid steel, polished, and the
surface is plated with hard chrome.
⑵ The first set of creasing roller, the cardboard after pre-press
is not easy to be crushed. |
Our Factory
|
