1300 Automatic Corrugated High Speed Flute Laminator Machine Flute
Laminating MachineFlute Laminatng Machine Introduction1. Computerized high-speed laminating, up to 12,000 sheets per hour
(paper length 700mm);2. Paper feeding head, the wind head is equipped with 4 sets of
"forward suction nozzles" and 2 sets of "upper and lower suction
nozzles";3. Feeder seat: E-type low-stack paperboard design, which can fit
the paper into the position with the pallet, and optional
track-assisted pre-stacking stack of paper4. Glue coating device: high-precision coating conveying with paper
recording device to prevent paper from being caught and glued wheel
edge blocking mechanism automatically liquid level control,
high-speed operation without overflowing glue can adjust glue
backflow; Main Parameter | Model | HF-H1300 | Maximum size (W*L)(mm) | 1100*1300 | Minimum size (W*L)(mm) | 400*400 | | Top feeding paper thickness | 200g/m2-1100g/m2 | | Bottom feeding paper thickness | 0.5-10mm | | Laminate precision (mm) | ≤±1.5 | | Max.Speed (p/hour) | 12000 | | Overall dimension | 13600×2050× 2600mm | | Total weight | 8000kg | | Total power | 16.6KW |
Main Units | Top paper feeding unit Consisting of stream feeding suction head,four sets of forwarding
suckers ensuring smooth transportation of substrate. | | Bottom paper feeding unit The servo motor is used to drive the suction belt to feed the
paper, corresponding to A/B/C/D/E/F/N flute, three layers, four
layers, five Layer, seven-layer corrugated bottom paper and
paperboard, gray board bottom paper are all suitable for smooth and
accurate conveying; enhanced mutual pressure suction design, the
thickest 1100g bottom paper can be sent . | | Positioning unit The use of multiple sets of photoelectric sensor at bottom sheets
relative position, control top sheets on both sides of the servo
motor to do independent compensation action, so that accurate
positioning of top paper and the bottom paper. |
Our Factory
|
