HVAC Discrete Radial NTC Thermal Resistor 100KOhm 3950 25mm

Discrete Radial NTC Thermal Resistor Thermistor Assy 100 Kohm 3950 25mm For HVAC

Description Of The NTC Thermal Resistor

MF55 series thin film thermistors are frequently used for applications where limited space is concern. With typical thickness of 0.9mm max they are ideal choice for precise temperature measurement between flat surfaces where quick response time is critical. MF55 series thermistors are available with wide range of RT characteristics and typical measurement tolerance less than +/-0.3°C.

Typical Application Of The NTC Thermal Resistor

* PC/Laptop
* Office automation equipment
* Heat-sinks temperature measurement
* Others...

Main Features Of The NTC Thermal Resistor

* Quick response time
* Small thickness
* Low cost
* Very good long term stability
* Point Matched Characteristics down to 1%
* Wide range of Resistance and Beta Values
* Operating temperature range: from -40°C to 120°C
* Standard R25 values are 5kohms,10kohms,50kohms and 100kohms with lengths of 11mm.15mm,20mm,25mm, 36mm,44mm.45mm,50mm, and 75mm .

Standard Specification Of The NTC Thermal Resistor

Notes:

1). Do not bend the resistance wire frame at will to avoid the chip and wire frame falling off and causing poor resistance;

2). The temperature should not exceed 300℃ during welding, and the welding time should not exceed 0.5 seconds;

3). Use a hot air gun when shrinking the sleeve, and the temperature of the air gun should be controlled at about 120℃;

4). Use a constant-temperature soldering iron when soldering, with a flat soldering iron tip, holding the resistor in one hand and the wire in the other for butt welding, which can improve production efficiency and shorten welding time;

5). Special Note: Do not touch the chip (ie the top of the resistor) with your hands!

6). Custom made is available

Dimension Of The NTC Thermal Resistor (mm)

ROHS & REACH Certification

Related Products Of The NTC Thermal Resistor