100m Ohm ST12 AMT Temperature Thermal Switch 16A Bi Metal Temperature Switch

Open Frame Bimetal Temperature Thermal Switch ST-12 AMT Thermostat For Hair Dryer

Description Of The Thermal Switch ST-12 AMT Thermostat For Hair Dryer

The AMT Series thermostat available from AMPFORT offers an open frame design and provides a safer and more reliable protection on circuits.The PTC component and contact circuit form a parallel circuit. With the heating up of temperature, the contact circuit is off and current flows through PTC component to form a loop.The temperature of the PTC component increases rapidly, and being higher than the rated reset temperature, it keeps the circuit in the off state. When the main power is removed, the temperature decreases to the reset temperature of bimetallic strip, the strip recovers rapidly and contact closes.

Features of Structure Of The Thermal Switch ST-12 AMT Thermostat For Hair Dryer

1. Quickly respond to the variation of temperature, and has the function of automatic reset.
2. No current flows through bimetallic strip so the influence of self-heating effect is avoided and it leads to a long service life with little change in temperature.
3. Environmental friendly high-power silver contact is adopted, being accord with the demands of safety approval for export.
4. Applies imported environmental friendly material which is approved by SGS test.

Dimensions Of The Thermal Switch ST-12 AMT Thermostat For Hair Dryer

Trip Temperature Table Of The Thermal Switch ST-12 AMT Thermostat For Hair Dryer

Direction for Use Of The Thermal Switch ST-12 AMT Thermostat For Hair Dryer

1. The product is applicable to the thermal radiation control on various electric heating appliances including electric hairdryers, electric heaters, warm air blowers, dehumidifiers, stewpots, etc...
2. Never touch wire protector or temperature sensor during the installment and utilization of thermal protectors, or it will lead to the failure of protectors because of inaccurate temperature and loose contact.

AMT thermal protector's Application Of The Thermal Switch ST-12 AMT Thermostat For Hair Dryer

AMT thermostat is applicable to the thermal radiation control on various electric heating applianceincluding electric Hair Dryer, Electric Fan Heaters, Popcorn Machines, Electric Ovens, Dish Dryers, Electric heaters, dehumidifiers, stewpots etc.

* Blowers

* Dehumidifiers

* Thermal radiation control

* Fan heaters

* Heating elements

* Appliances

Features Of The Thermal Switch ST-12 AMT Thermostat For Hair Dryer

* Open Frame

* Limiter for connection / air sensing

* Quick temperature response

* Manual reset function w/o the push button

* Installment with bracket available for easy direct fixing

* This applies to products Hair dryers, heaters,wind machines,rising damp machines,wair until the Heat of electro thermal electrical radiation control.

* Thermal protection device in the course of installation and use, and never allow touching of shrapnel,and temperature part, or it will lead to inaccurate temperature protection devices, and can not have access to undesirable work.

* Changes in temperature can make a quick response, and automatic restoration of function.

* Bimetal not currents through, avoid the impact from the effects of heat, temperature changes small,long life.

* Silver contact with green power,consistent with the regulations for export.

* Using all green materials imported by SGS testing.

Technical Parameters Of The Thermal Switch ST-12 AMT Thermostat For Hair Dryer

Life span Of The Thermal Switch ST-12 AMT Thermostat For Hair Dryer

Product in the rated voltage, current, power factor of 1 condition, plus heat source make it 6000 times, should satisfy the following conditions:
A) action temperature should be within + / - 5 ℃ in the initial value.
B) should be under 50 m Ω contact resistance;(reference)
C) contact no welding or fall off.