17AM 250V Thermal Protector Bimetal Thermostat Switch ROHS Self Hold

Self-Hold Normal Closed 17AM Thermal Protector 10A 250V 45C~180C For Motor Power

Applications Of The 17AM Thermal Protector 10A 250V 45C~180C

Ballasts, fluorescent lamps, motors, motors, transformers, laminators,

rechargeable batteries, solenoids, household appliances, PCB boards.
• Shaded Pole Motor
• Permanent split capacitor motor
• Fluorescent lighting ballasts
• HID ballasts
• Transformer
• Recessed lighting fixtures
• Battery packs
• Vacuum cleaners
• Automotive accessory motors, solenoids, PC boards

Features Of The 17AM Thermal Protector 10A 250V 45C~180C

(1) Concise design structure
(2) Can sense temperature and current at the same time
(3) Fast and precise action
(4) Leads of various specifications can be riveted according to customer requirements
(5) The terminals of the riveting wire can be divided into two types: the same direction and the opposite direction

(6) Miniature size.
(7) Individually temperature calibrated and checked.
(8) Positive make and break with Klixon® snap action disc.
(9) Repeatable temperature performance over life.
(10) Gasket steel case suitable for many impregnation processes.
(11) Current and temperature sensitivity for maximum design flexibility.
(12) Wide selection of leads and insulating sleeves.
(13) Same size and opposite side terminations.
(14) Cadmium free contacts

Specifications Of The 17AM Thermal Protector 10A 250V 45C~180C

17AM Temperature Table Of The 17AM Thermal Protector 10A 250V 45C~180C

Dimension Of The 17AM Thermal Protector 10A 250V 45C~180C (mm)

Performances Of The 17AM Thermal Protector 10A 250V 45C~180C

1 Rated Electrical Parameters

AC120V,20A,AC250V,9A,DC16V,20A

2 Action temperature ,see Note 2

3 Insulation voltage:Between lead wire and insulation tube ,can withstand AC1500V for 1 mins or AC1800V for 1sec and won’t breakdown, leakage current should be below 10mA.

4 Insulation resistance:The resistance between the leads and insulation sleeve is >100 M with 500 VDC at 25 °C.

5 Contact Resistance

≤30mΩ.(Ref value)

6 Heat resistance test

Place prodcut in the environment : 150℃ for 96 Hrs

7 Humid resistance test

Place prodcut in the environment : 40℃ RH=95% for 96 Hrs

8 Thermal shock test

Exchange product into 150℃ and -20℃ for 30mins, total 5 cycles.

9 Resistance to vibration experiment

Products can withstand the amplitude of 1.5 mm, frequency of 10-55 hz sinusoidal vibration.Products can withstand the amplitude of 1.5 mm, frequency of 10-55 hz sinusoidal vibration.

10 Drop test

Products free fall into the ground (plastic floor) from the height of 70 cm for 1 time. 3-6, 3 to 7, 3-8 -, 3-9, 3-10 experiments should satisfy the following conditions:

A) action temperature changes in the initial value within + / - 7 ℃;

B) should be under 50 m Ω contact resistance;

C) shall be no obvious deformation;

D) wires without cracking damage.

Life span Of The 17AM Thermal Protector 10A 250V 45C~180C

Product in the rated voltage, current, power factor of 1 condition, plus heat source make it 2000 times, should satisfy the following conditions:

A) action temperature should be within + / - 5 ℃ in the initial value.

B) should be under 50 m Ω contact resistance;(reference)

C) contact no welding or fall off.

Continue to experiment to 10000 times after action

Product guarantee Of The 17AM Thermal Protector 10A 250V 45C~180C