15A Glass 0.5mm Fastmount Panel Clips 250V Fast Acting Low Profile Clip

Panel Mount Classis Low Profile Glass Fuse Clip For 6x30mm Fast Acting Tube Fuse

6*30 fuse clip model classification Of The Panel Mount Classis Low Profile Glass Fuse Clip

The fuse clip refers to the clip for installing the fuse. It can be generally divided into: current fuse clip and automobile fuse clip. Generally, there are three surface coatings: nickel-plated, tin-plated and silver-plated. The current fuse clip model is generally reflected by the size of the installed fuse, such as 3*10, 3*10 is the fuse size, and 5*20, 6*30, 10*38, the most important are these 4 sizes, relative The corresponding size is the corresponding model, one to one, no specific model

At present, the material used by domestic fuse clip manufacturers is basically brass. Brass is the best and most conductive metal material. Regardless of the use of fuse clips, copper materials are used as conductive carriers for many other electronic components. So is there any characteristic of brass? Why should we choose it as the carrier of electronic component materials? Please see its characteristics:

1. Brass has good conductivity and low resistance

2. Easy to process

3. Convenient electroplating

4. Lower cost

Specification Of The Panel Mount Classis Low Profile Glass Fuse Clip

Size Of The Panel Mount Classis Low Profile Glass Fuse Clip (mm)

The use process and temperature requirements of automobile fuse holders

When the car fuse holder is used mainly refers to the box to install the fuse in the car, its products can be effectively divided into panel-mounted car fuse holders, leaded car fuse holders, and car fuse clips. The panel is used for car electronics of the car, such as car amplifier, car horn, car DVD and other fuse holders.

In the process of research and use of automobile fuse holders, to a certain extent, we can improve the tolerance of its fuses. Due to its power management or its external interference current fluctuates, overload in a certain range of influence appears in the circuit of the automobile fuse holder. When the overload current is relatively large, the fuse should cut off the overload current within a fixed time. Automobile fuse holders can protect other electronic product parts in the working circuit to a certain extent. When a short circuit occurs in the circuit and a large current occurs, the fuse can cut off the circuit, which will make them themselves Avoid serious damage due to overcurrent.

The fuse holder in the car fuse holder holder can be used at a voltage equal to or less than its rated voltage,  but generally cannot be used for a circuit voltage greater than the rated voltage of the fuse holder, the voltage drop in the device, and the rated current on the fuse holder The circuit.

The voltage across the fuse holder and the voltage drop across the fuse holder have a certain effect on the circuit, so there is a voltage drop in the regulations, which is not required in the regulations. The overload current of the automobile fuse holder mainly refers to the current flowing through the circuit is greater than the normal working time. If the overload current cannot be cut off, it will cause damage to other electronic components of the circuit.

Car fuse holders are distinguished according to their fuse size. When in use, they can be effectively divided into large fuse boxes, medium fuse boxes, and small fuse boxes. According to the material, they can be divided into plastic fuse boxes and bakelite fuse boxes. According to environmental protection, it can be divided into environmental protection fuse box and non-environmental protection fuse box. According to the installation method, it can be divided into lead type fuse box and circuit board type fuse box, instrument panel installation fuse box, etc.