Automatic Rotary Die Cut Corrugated Carton Box Machine Creasing

Automatic Rotary Die Cut Corrugated Carton Box Machine

1. Adsorption automatic feeder, one-slotting, Cut corner, creasing, drilling.
2. precision die cutting from+0.8mm to-0.8mm
3. Phase planetary gear used electric adjustment, turn on and turn down were quick adjustment.
4. Before manually adjust block cardboard side block electric adjustment
5. Paper rollers have a plastic face, to prevent cardboard, to increase feed accuracy.

Die Cutting Part

1. Die cutting roller for the high quality steel materials,30mm thickness, balance correction, hard-chrome plating.
2. Wallboard for high-quality cast iron material,50mm thickness, and large processing center production.
3. Soft-roll automatic grinding institutions to pouches repeat usage,grinding3-4times;
4. Line speed automatic compensation to ensure that each batch of cardboard boxes full of die-size line;
5. Use Imported Polyurethane soft rubber, ease of installation, can cut 12000000 times.;
6. Mechanical soft roll about 40 mm lateral movement ,the pads wear uniform;
7. 40cr material the use of grinding gears for 6,low noise long life;
8. Die cutting roller cylinder automatic separation devices to reduce wear pouches.
9. Main specification
10. the mould roller (the roller)
    1) die cutter roller diameter ф552mm (excluding die cutter)
    2) Steel material, surface grinding, hard chromium plating.
    3) balance correction, increase the operating stability.
    4) die cutter screw hole spacing 50 mm ×52.78 mm.
    5) for die cutter height 25.4mm.
    11. rubber roller (upper roller)
    1) diameter φ516mm
    2) Steel Research surface grinding, chrome plating
    3) balance correction, increase the operating stability
    4) to manually adjust the gap with the cutting die.
    5) The pad thickness 11.4 mm (diameter of φ666.75 mm)
    6) The mechanical lateral 40 mm, swimming device
    3, Phase adjustment
    1) The planetary gear-type structure, with the printing department.
    2) die cut phase adopts electric adjustment of digital 360 ° (run, stop can be adjusted.)

Stacker

1. auto or manual for stacker system control

2.the driving belt of connection arm can adjust the elasticity alone and can choose the number of connection arm as will

3.platform elevator is drive by hydraulic

4.height up to 1600mm

5.platform elevator with brake control device to keep stable in fixed position and antislipping

6.pneumatic paper bearing board assist the circle receiving device

7.manual adjustment the position of back block

8.the plane wrinkle leather belt which prevent the cardboard glides down

9.The stacker up and down by hydraulic